Pws Programmable Wall Station; Pws Device - Bosch IRIS-Net User Manual

IRIS-Net

PWS PROGRAMMABLE WALL STATION

PWS series wall stations allow local operation and control of different devices and systems via CAN-Bus. Proceeding
different functions, like for example source selection, volume control, muting or switching devices on or off is possible.
If, in addition, a suitable central control unit is used, controlling building tasks (lighting, heating/air conditioning, etc.)
is possible as well.
The minimal configuration for a wall station consists of:
– a front user panel (e.g. PWS-4)
– a CAN-Bus coupler (PWS-C)
– an in IRIS-Net programmed software configuration that has been transferred to the wall station via CAN-Bus
– a to be controlled system controller (e.g. Electro-Voice NetMax N8000)
Front user panels are the parts of a wall station that are viewable for the user. A variety of front user panels with
different controls and indicators are available. Up to three user panels can be combined in a single wall station using a
single CAN-Bus coupler for all of them. The CAN-Bus coupler PWS-C provides connection between the front user panels
and the CAN-Bus. The maximum number of devices on a CAN-Bus (e.g. PWS-C, Remote Amplifier, etc.) depends on the
employed central control unit. Please refer to the documentation shipped together with your device.
The complete configuration for wall stations needs to be programmed in IRIS-Net, where you define the number and
nature of the wall stations employed in your system. It is also here, where you assign the functions to controls and
indicators.
The configuration procedure including all different possibilities will be explained in the following chapters. Please refer
to the PWS owner's manual in directory /IRIS-Net/Documentation/Wall Station also.

PWS Device

Begin by creating a PWS device in your IRIS-Net project, by dragging a PWS from the Devices category into the Object
List or from the Devices window over the Worksheet (see also chapter Devices and Menu Configurations). The
following dialog appears:
Bosch Security Systems B.V.
PWS PROGRAMMABLE WALL STATION | en
User Manual
710
2017.05 | 3.20 | F.01U.119.956