Table of Contents
Advertisement
Bosch Video Management System
9.
Adding the ATM/POS bridge to Bosch VMS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. Configure the desired alarm settings for this event.
13.
14. Perform a test to ensure that the alarm is working as desired.
15.3
Adding a Bosch Allegiant input alarm
After a Bosch Allegiant device is added to Bosch VMS, you add Allegiant alarm inputs.
1.
2.
3.
4.
5.
6.
7.
8.
Bosch Sicherheitssysteme GmbH
Leave the default settings for the ports:
–
port1: 4201
–
port2: 4200
Connect the device to your Bosch VMS network.
Start Configuration Client.
Click
Devices, expand the Logical Tree, expand
Add Bosch ATM/POS-Bridge.
The Add Bosch ATM/POS-Bridge dialog box is displayed.
Type a name as desired and type the settings that you configured earlier.
Click the Inputs tab and select the required inputs.
Click
to save the settings.
Click
Events.
Expand
, expand POS Bridge Input, click Data Input.
In the Trigger Alarm list, select Always to ensure that this event always triggers an alarm.
If you want the event trigger an alarm only during a certain time span, select a schedule.
Click
to save the settings.
Click
Alarms.
Click
to save the settings and click
On the Device Tree, click the Allegiant device entry.
Click the Inputs tab and click Add Input.
Add the desired input alarms.
Click Events.
In the Event Tree, expand Allegiant Devices, expand Allegiant Input, and click Input
Closed or Input Opened (depends on your application).
In the Trigger Alarm list, select Always to ensure that an event always triggers an alarm.
If you want the event trigger an alarm only during a certain time span, select a schedule.
Click
to save the settings and click
Perform a test to ensure that the alarm is working as desired.
Configuration Manual
Configuration examples | en
, right-click
to activate the configuration.
to activate the configuration.
2013.03 | V1 | Configuration Client
123
, click
Advertisement
Table of Contents
