Adding Additional Licenses; Using Bosch Vms Operator Client - Bosch DIP-3040-00N Installation Manual

DIVAR IP 3000
5.
6.
7.
To perform further functionalities refer to the Bosch VMS manual. References to the manual
are described in Additional Documentation and client software, page 31.
4.5.2

Adding additional licenses

You can add additional licenses using Configuration Client.
To activate the software:
1.
2.
3.
4.
5.
6.
7.
4.6

Using Bosch VMS Operator Client

Use Bosch VMS Operator Client to verify the live, recording and playback functionality of
DIVAR IP.
To verify live image functionality in the Operator Client
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Note:
It is also possible to configure the devices individually with specific IP addresses based
on MAC address.
Enter the starting IP address for the address range you want to use, click the Calculate
tab, then click OK.
To restart the devices, click OK.
Close Configuration Client .
Start Configuration Client.
On the Tools menu, click License Manager....
The License Manager dialog box is displayed.
Click to check the boxes for the software package, the features, and the expansions that
you want to activate. For the expansions, enter the number of licenses.
If you have received a Bundle Information file, click Import Bundle Info to import it.
Click Activate.
The License Activation dialog box is displayed.
Write down the computer signature or copy and paste it into a text file.
On a computer with Internet access, enter the following URL into your browser:
https://activation.boschsecurity.com
If you do not have an account to access the Bosch License Activation Center, either
create a new account (recommended) or click the link to activate a new license without
logging on. If you create an account and log on before activating, the License Manager
keeps track of your activations. You can then review this at any time.
Follow the instructions to obtain the License Activation Key.
Return to the Bosch VMS software. In the License Activation dialog box, type the License
Activation Key obtained from the License Manager and click Activate.
The software package is activated.
On the Bosch VMS default screen, double-click the Operator Client icon
application starts.
Enter the following and click OK.
User name: admin
Password: no password required (if not set with the wizard)
Connection: 127.0.0.1
Click the live image icon. The Logical Tree with the cameras is displayed.
Select a camera and drag it to an image window. The image of the camera is displayed if
the camera is assigned correctly.
Note:
Cameras in the image window with a red dot in the camera's icon are viewed live.
Installation Manual
System setup - first steps | en
. The
2014.03 | V4 | DOC
25