Adding A Video Streaming Gateway Device; Adding A Bosch Camera To A Vsg; Adding An Onvif Camera To A Vsg - Bosch MBV-BPRO-45 Configuration Manual

Bosch Video Management System
7.32

Adding a Video Streaming Gateway device

Main window >
Streaming Gateway > Edit Streaming Gateway dialog box
You add a VSG to the system to enable assigning and configuring cameras to this VSG.
To add a VSG:
1.
2.
P
See also
–
7.33

Adding a Bosch camera to a VSG

Main window >
To add a camera:
1.
2.
3.
4.
5.
6.
7.
See also
–
–
7.34

Adding an ONVIF camera to a VSG

Main window >
Bosch Sicherheitssysteme GmbH
Devices Expand
Make the required settings for your VSG device.
Click Add.
The VSG device is added to the system. The cameras assigned to this VSG are recorded.
Video Streaming Gateway device page, page 166
Devices > Expand
Select the desired cameras and click
The Add/Edit dialog box is displayed.
Note: Select cameras of the same type, for example only Bosch cameras. Otherwise the
button is disabled.
Type in user name and password and click Connect.
If the connection to the encoder is established successfully, the configuration settings in
the Protocol settings group are active.
If you do not want to wait until the connection is established, click Skip.
In the Type list, select Bosch RCP+.
In the Video input and Stream and Protocol lists make the required settings.
If required, type a name for the camera in the VSG Camera Name column.
Click OK.
Click .
Add/Edit dialog box (Video Streaming Gateway), page 166
Assignment tab (Video Streaming Gateway), page 166
Devices > Expand
>
> Expand
to add them to the VSG cameras list.
> Expand
Configuration Manual
Configuring devices | en
> Right-click > Click Add
> Expand
> Expand
2013.03 | V1 | Configuration Client
79
>
>