Table of Contents
Advertisement
214
en | Alarms page
23.1
Alarm Settings dialog box
Main window >
Alarm Settings tab
Max. Image panes per alarm:
Enter the maximum count of Alarm Image panes to be displayed in case of an alarm.
Auto-clear time:
Enter the number of seconds until an alarm is automatically cleared.
This only applies for alarms that are set to Auto-clear in the Alarms page.
Manual alarm recording time:
Only valid for NVR recordings.
Enter the number of minutes for the duration of alarm recording that a user can start manually
in the Operator Client.
The user can stop the manual recording before this time is elapsed.
Analog Monitor Groups tab
Display order in case of same alarm priority:
Select the desired entry for sorting alarms of the same priority according to their time stamp.
Show blank screen
Click to configure that on a monitor not being used for alarm display nothing is shown.
Continue live display
Click to configure that on a monitor not being used for alarm display live display is shown.
23.2
Select Image Pane Content dialog box
Main window >
one of the 1-5 columns
Allows you to select the Logical tree item that is displayed and recorded (if the item is a
camera) in case of the selected alarm.
Notice!
i
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
Search Item
Enter text to find an item in the Logical Tree.
Find
Click to find the camera with the entered search text in its description.
Live
Click to determine that the live image of the camera is displayed in case of an alarm.
Instant playback
Click to determine that instant playback of the camera is displayed.
The rewind time for instant playback is configured in the Alarm Settings dialog box, see Alarm
Settings dialog box, page 214.
2013.03 | V1 | Configuration Client
Alarms >
Alarms >
or
Configuration Manual
Bosch Video Management System
> Alarm Image Panes column > Click ... in
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
