Table of Contents
Advertisement
186
en | Encoders / Decoders page
18.13
PTZ page
Auto Pan Speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
–
–
Inactivity Period
Determines the behavior of the dome when the control for dome is inactive. Select a time
period from the pull-down list (3 sec. - 10 min.). The default setting is 2 minutes.
Auto Pivot
The Auto Pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image.
Set the Auto Pivot to On (default) to automatically rotate the camera 180º when following a
subject traveling directly beneath the camera. To disable this feature, click Off.
Freeze Frame
Select On (default) to freeze the image while the camera moves to a predetermined scene
position.
Tilt up limit
Click Set, to set the upper tilt limit of the camera.
Tilt limits
Click Reset to clear the upper tilt limit.
18.14
Prepositions and Tours page
Allows you to define the individual scenes and a preposition tour comprised of the defined
scenes.
To add scenes:
Click
To delete scenes:
Select the scene, then click
To overwrite (save) scenes:
Click
To view scenes:
Select the scene, then click
Include in standard tour (marked with *)
Select the check box if the scene should be part of the preposition tour. The asterisk (*) on
the left of the scene name indicates this.
2013.03 | V1 | Configuration Client
Off (default): Camera remains on a current scene indefinitely.
Scene 1: Camera returns to Preset 1.
Previous Aux: Camera returns to the previous activity.
.
.
.
.
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
