Table of Contents
Advertisement
64
en | Configuring devices
7.5.6
Assigning NVRs to Failover NVRs
Main window >
or
Main window >
For an NVR, you can configure a Failover NVR that takes over the tasks of the NVR if it fails.
Ensure that an NVR is switched to a Failover NVR.
You can easily configure several NVRs to have a Failover NVR assigned.
To assign an NVR to a Failover NVR:
1.
2.
3.
4.
To assign multiple NVRs to a Failover NVR:
1.
2.
3.
4.
5.
7.5.7
Assigning NVRs to a Redundant NVR
Main window >
You can only assign one NVR to a Redundant NVR. If you select a Primary NVR that already has
been assigned to another Redundant NVR, the assignment to the previous Redundant NVR is
removed.
Ensure that an NVR is switched to a Redundant NVR.
To assign a Primary NVR to a Redundant NVR:
1.
2.
3.
4.
7.5.8
Displaying information on an NVR
Main window >
2013.03 | V1 | Configuration Client
Devices > Expand
Devices > Expand
Expand
.
Select an NVR as required.
Click the Global Settings tab.
In the Failover NVR list, select the required Failover NVR.
Expand
.
Select the desired Failover NVR.
Click the Assigned NVRs tab.
In the Time [h] column, select the required NVRs.
Click Add NVR.
Each added Primary NVR has the selected Failover NVR assigned.
Devices > Expand
Select the desired Redundant NVR.
Click the Assigned NVR tab.
The table displays all Primary NVRs.
In the first column, click to check the desired NVR.
Each checked primary NVR has the selected Redundant NVR assigned.
In the Backup column, make the desired setting.
When cleared, the Camera Storage tab becomes active.
Devices> Expand
> Expand
> Expand
> Expand
> Expand
Configuration Manual
Bosch Video Management System
>
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
