Table of Contents
Advertisement
158
en | Devices page
Allows you to add or configure an I/O module.
Currently only ADAM devices are supported.
17.23.1
ADAM page
Main window >
Displays information on the selected ADAM device.
Allows you to change the display name of an ADAM device.
ADAM type:
Select the appropriate device type.
Inputs total:
Displays the total number of inputs available with this device type.
Relays/Outputs total:
Displays the total number of relays available with this device type.
17.23.2
Inputs page
Main window >
Allows you to change the display names of the inputs of the selected ADAM device.
Number
Displays the logical number of the input.
Name
Click a cell to change the display name of an input.
17.23.3
Relays page
Main window >
Allows you to change the display names of the relays of the selected ADAM device.
Number
Click a cell to change the logical number of a relay.
Name
Type the display name of the relay.
17.24
Allegiant CCL Emulation page
Main window >
Allows you to activate the Bosch AllegiantCCL emulation. This emulation starts an internal
Bosch VMS service that translates CCL commands of the Matrix Switch into Bosch VMS. You
configure a COM port of the Management Server to listen to these CCL commands. The CCL
emulation helps to exchange existing Allegiant devices with Bosch Video Management System
or to use Bosch Video Management System with applications that support the Allegiant CCL
commands.
2013.03 | V1 | Configuration Client
Devices > Expand
Devices > Expand
Devices > Expand
Devices > Expand
Configuration Manual
Bosch Video Management System
>
>
> ADAM tab
>
>
> Inputs tab
>
>
> Relays tab
>
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
