Bosch MBV-BPRO-45 Configuration Manual page 227

Bosch Video Management System
LDAP Server Settings
LDAP Server:
Type the name of the LDAP server.
Port:
Type the port number of the LDAP server (default unencrypted: 389, encrypted: 636)
Secure connection
Select the check box to activate encrypted data transmission.
LDAP basis for user:
Type the unique name (DN = distinguished name) of the LDAP path in which you can search
for a user. Example for a DN of the LDAP
basis:CN=Users,DC=Security,DC=MyCompany,DC=com
Filter for user:
Select a filter used to search for a unique user name. Examples are predefined. Replace
%username% with the actual user name.
LDAP basis for group:
Type the unique name of the LDAP path in which you can search for groups.
Example for a DN of the LDAP basis: CN=Users,DC=Security,DC=MyCompany,DC=com
Filter for group member search:
Select a filter used to search for a group member.
Examples are predefined. Replace %usernameDN% with the actual user name and his DN.
Proxy User
User name (DN):
Type the unique name of the proxy user. This user is required to allow the users of this Bosch
VMS user group to access the LDAP server.
Password:
Type the proxy user password.
Test
Click to test whether the proxy user has access to the LDAP server.
Test User / User Group
The entries in this group box are not saved after clicking OK. They only serve for testing.
User name:
Type the name of a test user. Omit the DN.
Password:
Type the test user password.
Test User
Click to test whether the combination of user name and password is correct.
Group (DN):
Type the unique group name with which the user is associated.
Test Group
Click to test the association of the user with the group.
Group search filter:
Do not leave this field empty. If there is no entry, you cannot assign an LDAP group to a Bosch
VMS user group.
Select a filter to find a user group.
Examples are predefined.
Bosch Sicherheitssysteme GmbH Configuration Manual
User Groups page | en 227
2013.03 | V1 | Configuration Client