Table of Contents
Advertisement
Bosch Video Management System
7.37
Adding a local storage or live only device
Main window >
or
Main window >
You can add Bosch or ONVIF encoders with local storage or live only encoders.
To add a local storage:
1.
2.
3.
4.
To add a Bosch live only device:
1.
2.
3.
4.
To add an ONVIF live only device:
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Devices >
Devices >
Right-click
and click Scan Local Storage Encoders.
The Bosch VMS Scan Wizard is displayed.
Assign the device.
If required assign multiple devices.
Click Next >>.
The next step of the wizard is displayed.
Click Finish.
The device is connected to your Bosch Video Management System.
Right-click
and click Scan live-only Encoders.
The Bosch VMS Scan Wizard is displayed.
Assign the device.
If required assign multiple devices.
Click Next >>.
The next step of the wizard is displayed.
Click Finish.
The device is connected to your Bosch Video Management System.
Right-click
and click Scan live-only ONVIF Encoders.
The Bosch VMS Scan Wizard is displayed.
Assign the device.
If required assign multiple devices.
Click Next >>.
The next step of the wizard is displayed.
Click Finish.
The device is connected to your Bosch Video Management System.
Configuration Manual
Configuring devices | en
2013.03 | V1 | Configuration Client
81
Advertisement
Table of Contents
