Table of Contents
Advertisement
64
en | Central Console, computer setup and programming
7.6
Transponder database dialog
From the File menu, select the Transponder database menu item. This dialog allows you to
check and enter all the configuration details of the SE coordinators and their corresponding
SE receivers.
Figure 7.3: Find Transponder's Database Record dialog
Depending on the type of transponder record (transponder or SE coordinator), the elements
of the screen may differ. The following table, applicable to SE coordinator only, describes the
elements of the Find Transponder's Database Record dialog.
Element
Type
Name
2018.03 | SE3v1.0 | DOC
Usage/Description
This field indicates the type of transponder record that you are
currently viewing. Currently, there are two types of transponders:
transponder and SE coordinator.
This drop-down list contains the names of the transponder
record. Selecting the name of the SE coordinator in the drop-
down list displays information of the SE coordinator record in the
dialog window. The SE coordinator names are assigned during
set-up and are used to indicate the physical location of the SE
coordinator, or the region of the protected area covered by a
particular SE coordinator.
Technical Reference Manual
Security Escort
Robert Bosch (SEA) Pte Ltd
Advertisement
Table of Contents
