26-1. Paper Take-Up Mechanism
The Paper Take-Up Rolls are normally in their raised (retracted) position so
that they will not hamper proper loading of paper. When the Start Key is
pressed, Paper Take-Up Solenoid (MB-1) SL51 is deenergized causing the
Paper Take-Up Rolls to press the paper stack downward and take up a
sheet of paper.
There are Paper Stoppers provided that block the leading edge of the paper
stack as it is loaded on the Table, preventing any portion of the leading edge
of the paper from getting inside. These Stoppers are unlocked at paper
take-up, allowing paper into the copier.
Paper Take-Up Clutch (MB-1) CL51 controls the turning and stop of the
Paper Take-Up Rolls.
In Standby
Lock Levers
Paper Take-Up
Rolls
Paper Stoppers
At Take-Up
Lever
Rack Gear
Paper Take-Up
Solenoid (MB-1) SL51
M-82