Inspect The Operator's And Safety Manuals; Inspect The Decals And Placards - Genie Z-25/8 Service Manual

Section 4 • Scheduled Maintenance Procedures
Table A Procedures
A-1
Inspect the Operator's and
Safety Manuals
Maintaining the operator's and safety manuals in
good condition is essential to safe machine
operation. Manuals are included with each
machine and should be stored in the container
provided in the platform. An illegible or missing
manual will not provide safety and operational
information necessary for a safe operating
condition.
1 Check to be sure the storage container is
present and in good condition.
2 Check to make sure that the operator's,
responsibilities and safety manuals are present
and complete in the storage container in the
platform.
3 Examine the pages of each manual to be sure
that they are legible and in good condition.
4 Always return the manuals to the storage
container after use.
Contact your authorized Genie
distributor or Genie Industries if
replacement manuals are needed.
4 - 2 Genie Z-20/8N & Genie Z-20/8 & Genie Z-25/8
A-2
Inspect the
Decals and Placards
Maintaining all of the safety and instructional
decals and placards in good condition is
mandatory for safe machine operation. Decals
alert operators and personnel to the many possible
hazards associated with using this machine. They
also provide users with operation and maintenance
information. An illegible decal will fail to alert
personnel of a procedure or hazard and could
result in unsafe operating conditions.
1 Refer to the Decals section in the
Genie Z-20/8N & Genie Z-20/8 & Genie Z-25/8
Operator's Manual and use the decal list and
illustrations to determine that all decals and
placards are in place.
2 Inspect all decals for legibility and damage.
Replace any damaged or illegible decal
immediately.
Contact your authorized Genie
distributor or Genie Industries if
replacement decals are needed.
First Edition • Third Printing
Part No. 41314