Removing A Slimline Optical Drive (Sr1530Hcl/Sr1530Hcls); Figure 61. Removing Optical Drive From Server System (Sr1530Hcl/Sr1530Hcls) - Intel SR1530CL User Manual

14. Optional: Install the front bezel. For instructions, see
on page
15. Install the server system cover. For instructions, see
Cover" on page
Removing a Slimline Optical Drive (SR1530HCL/
SR1530HCLS)
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the front bezel if it is installed. For instructions, see
Bezel" on page
5. Disconnect the optical drive power and data cables (see letters "A" and "B" in the
following figure). Remove the screw that secures the optical drive bracket to the
server chassis (see letter "C"). Save this screw. You will reinstall it later. Slide the
optical drive out through the front of the system (see letter "D").
Figure 61. Removing Optical Drive from Server System (SR1530HCL/
®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
27.
29.
iii.
28.
26.
D
SR1530HCLS)
"Installing the Front Bezel"
"Installing the Server System
"Removing the Server
A
B
C
"Safety
"Removing the Front
AF000960
59