Installing The Server System Cover; Figure 21. Removing The Server System Cover (Sr1530Hcl/Sr1530Hcls) - Intel SR1530CL User Manual

5. (SR1530HCL/SR1530HCLS) Remove the four screws at the front of the chassis
(see letter "A" in the following figure). Push rearward on the blue grip point at the
front of the server. Slide the cover back until it stops and then lift cover upward to
remove it (see letter "B").

Figure 21. Removing the Server System Cover (SR1530HCL/SR1530HCLS)

Installing the Server System Cover

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. (SR1530CL) Place the cover over the server system so that the side edges of the
cover sit just inside the server system sidewalls. Slide the cover forward (see letter
"A" in the following figure). Tighten the screw at the rear of the server (see letter
"B"). Install the two screws at the front of the server (see letter "C").
®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
B
A
iii.
AF001615
"Safety
29