Installing a Hot-Swap SAS/SATA Drive (SR1530HCL/
SR1530HCLS)
1. Remove the front bezel if it is installed. For instructions, see
Bezel" on page
2. Locate the drive position you want to use. See the following figure for drive
positions.
Figure 42. Locating Drive Positions (SR1530HCL/SR1530HCLS)
3. Open the latch at the front of the hard drive carrier. See letter "A" in the following
figure.
Figure 43. Removing the Drive Carrier (SR1530HCL/SR1530HCLS)
46
26.
A
®
Intel
Server System SR1530CL / SR1530HCL / SR1530HCLS
"Removing the Front
AF001619
AF001620