Figure 88. Removing Fan Bracket With System Fans From Server System (Sr1530Cl) - Intel SR1530CL User Manual

6. Remove the two screws that secure the fan bracket in place. Save these screws. You
will re-install them later (see letter "A" in the following figure).
Remove the fan cable from beneath the clip at the front of the fan bracket (see letter
"B").
Lift the fan bracket from the server. Lift the bracket at an angle, front of the bracket
first, to clear the hard disk drive brackets (see letter "C").
A
B
C
AF000990
Figure 88. Removing Fan Bracket with System Fans from Server System
(SR1530CL)
®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS 87