Page 1 ® Intel Server System SR1550AL/ SR1550ALSAS User’s Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel Order Number D31972-002...
Page 2 Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel product could create a situation where personal injury or death may occur.
Page 3 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 4 § ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 5: Preface
BIOS Setup screens, how to perform a BIOS update, and how to reset the password or ® CMOS. Information about the specific BIOS settings and screens is available in the Intel 5000 Series Chipsets Server Board Family Datasheet. See “Server System References”...
Page 6: Product Contents
Product Contents ® ® The Intel Server System SR1550AL ships with the Intel Server Board S5000PAL. For ® further information, see the Intel Server Board S5000PAL User’s Guide. ® Intel Server System SR1550AL Contents ® Your Intel Server System SR1550AL ships with the following items: ®...
Page 7: Safety Information
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the ® Intel Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/...
Page 8 重要安全指导在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。和/或上的 Intel http://support.intel.com/support/motherboards/server/sb/CS-010770.htm Server Boards and Server Chassis Safety Information（《Intel 服务器主板与服务器机箱安全信息》）。 ® viii Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 9 Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 10 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 11: Table Of Contents
Figure 13. Front Panel Features and Peripherals ..............19 Figure 14. Front Bezel Supporting the Standard Control Panel ..........24 ® Figure 15. Front Bezel Supporting the Intel Local Control Panel .......... 24 Figure 16. Front Bezel Supporting the Mini Control Panel ............25 Figure 17.
Page 12 Figure 42. Removing the I/O Expansion Module(s) from the Server Board......49 ® ® Figure 43. Installing the Intel RMM and the Intel RMM NIC Module to the Server System 50 ® ® Figure 44. Removing the Intel RMM and the Intel RMM NIC Module from the Server System Figure 45.
Page 13 Front Panel Features and Peripheral Devices ..............19 Hard Disk Drives ......................19 Slimline Optical Drive Carrier ..................19 Advanced Management Options ..................20 Intel® Remote Management Module ................20 Chapter 3: Hardware Installations and Upgrades ..........21 Before You Begin .........................21 Tools and Supplies Needed ..................21 System References .....................21...
Page 14 Installing and Removing the I/O Expansion Module(s) ............48 Installing the I/O Expansion Module(s) ............... 48 Removing the I/O Expansion Module(s) ..............49 ® ® Installing and Removing the Intel Remote Management Module and the Intel RMM NIC .. ® ® Installing the Intel RMM and Intel RMM NIC ............
Page 15 Verifying Proper Operation of Key System Lights ............91 Confirming Loading of the Operating System ..............91 Specific Problems and Corrective Actions ................92 Power Light Does Not Light ..................92 No Characters Appear on Screen ................93 Characters Are Distorted or Incorrect ................93 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 16 Regulated Specified Components ................121 Restriction of Hazardous Substances (RoHS) Compliance ..........122 End-of-Life / Product Recycling ..................122 Appendix G: Warranty ....................123 Limited Warranty for Intel® Chassis Subassembly Products ..........123 Appendix H: Installation/Assembly Safety Instructions ........127 English ..........................127 Deutsch ..........................129 ®...
Page 17 Avertissements sur le montage en rack ..............153 Décharges électrostatiques (ESD) ................154 Autres risques ......................154 Périphériques laser ....................155 Español ..........................155 Información de seguridad del servidor ..............155 Advertencias y precauciones sobre seguridad ............155 Aplicaciones y usos previstos ..................156 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide xvii...
Page 18 Advertencias sobre el cable de alimentación ............157 Advertencias el acceso al sistema ................158 Advertencias sobre el montaje en bastidor ............... 159 Descarga electrostática (ESD) .................. 159 Otros riesgos ......................160 ® xviii Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 19 Table 8. LED Information ......................98 Table 9. POST Error Beep Codes ...................98 ® Table 10. Error Beep Codes Generated by Intel Remote Management Module ....99 Table 11. POST Progress Code LED Example ..............105 Table 12. Diagnostic LED POST Code Decoder ..............106 Table 13.
Page 20 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 21: Chapter 1: Server System References
For in-depth BIOS Intel S5000 Server Board Family Server BIOS External Product information Specification Found: available to order by contacting your Intel field representative; Intel reference number 19953 For in-depth firmware ESB2 Baseboard Management Controller Core External Product ® information on the...
Page 22 Use this Document or Software software Accessories or other Intel Spares and Configuration Guide server products Found: available from your Intel field representative or on the Server Configurator Tool at http://indigo.intel.com/ serverconfiguratortool/default.aspx Hardware (peripheral Tested HardwareOperating Systems List boards, adapter cards)
Page 23: Figure 1. Intel ® Integrated Server System Sr1550Al
This chapter briefly describes the main features of the server system. This chapter provides a illustrations of the product, a list of the server system features, and diagrams showing the location of important components and connections on the server system. TP02211 ® Figure 1. Intel Integrated Server System SR1550AL...
Page 24: Table 2. Intel ® Server System Sr1550Al Feature Summary
37pounds (16.8 kg) - base chassis weight ® Server Board Intel Server Board S5000PAL ® ® Processor Support for up to two Dual-Core Intel Xeon processors 5000 sequence • Memory Eight DIMM slots supporting stacked DDR2 533/667 MHz FBDIMM memory •...
Page 25 ® Table 2. Intel Server System SR1550AL Feature Summary Feature Description • Peripherals Slimline bay for IDE optical drive • PCI riser card bracket • Control Panel (dependent Standard control panel on option selected) • ® Intel Local Control Panel •...
Page 26: Figure 2. Chassiscomponents
Power Supply Air Duct M. Mid-plane Board (Active Shown) Power Supply Filler (Second Power Supply Mini Control Panel Bay if Installed) Power Supply Module Rack Handle Server Board Hard Drive Bays Figure 2. ChassisComponents ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 27: Figure 3. Server Board Connector And Component Locations
GG. SATA Port 3 HH. SATA Port 4 SATA Port 5 SATA SW RAID 5 Activation Key Connector ® KK. Intel Remote Management LL. System Recovery Jumpers MM. Chassis Intrusion Switch Header Module (RMM) Connector ® NN. 3-pin IPMB Header OO.
Page 28: Figure 4. Bios Select Jumper
If pins 1-2 are jumpered, the BIOS in the lower bank will be selected on the next reset. These pins should be jumpered on 2-3 for normal operation. Figure 4. BIOS Select Jumper ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 29: Figure 5. Recovery Jumpers
These pins should be jumpered on 1-2 for normal operation. BMC Force Update Mode If pins 2-3 are jumpered, BMC Force Update Mode is enabled. These pins should be jumpered on 1-2 for normal operation. Figure 5. Recovery Jumpers ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 30: Figure 6. Light Guided Diagnostic Leds
® Intel Light Guided Diagnostics The server board contains diagnostic LEDs to help you identify failed and failing components, and to help you identify the server from among several servers. Except for the ID LED, the status LED, and the 5V standby LED, the LEDs turn on (amber) only if a failure occurs.
Page 31: Figure 7. Back Panel Connectors
Low Profile PCI Express* Add-in Card Slot Full Height PCI Add-in Card Slot Power Supply Module 1 ® Power Supply Module 2 (Filler Panel Intel Remote Management Module Shown) NIC (Optional) I/O Expansion Module (Optional) USB Port 5 USB Port 6...
Page 32: Raid Support
The Intel Server System SR1550AL provides an embedded SATA controller that ® supports both 1.5 and 3.0 Gbps data transfer rates. The Intel Server System SR1550ALSAS provides SAS and SATA support. Both systems can be configured for RAID 0, 1, and 10.
Page 33: Figure 8. Passive Sata Mid-Plane Components
TP02269 Fan 2 Power Fan 6 Power Fan 1 Power HBA I2C Connector Thumbscrew Fan 4 Power Bridge Board Connector Fan 3 Power Mid-plane Power Figure 8. Passive SATA Mid-Plane Components ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 34: Figure 9. Active Sas/Sata Mid-Plane Components
RAID Battery Backup Unit Connector Fan 1 Power Mid-plane Power RAID Activation Key Connector Thumbscrew Bridge Board Connector Fan 4 Power Fan 6 Power Fan 3 Power Mini-DIMM Connector Figure 9. Active SAS/SATA Mid-Plane Components ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 35: Figure 10. Mini Control Panel
The diagram below shows the features available on the mini control panel. The mini control panel is one of three required control options that can be selected. The other ® options are the standard control panel or the Intel Local Control Panel. For instructions on installing the control panel, see “Replacing the Control...
Page 36: Standard Control Panel
The diagram below shows the features available on the standard control panel. The standard control panel is one of two required control options that can be selected. The ® other option is the Intel Local Control Panel. For instructions on installing the standard control panel, see “Replacing the Control...
Page 37: Figure 11. Standard Control Panel
Figure 11. Standard Control Panel ® Intel Local Control Panel ® The diagram below shows the features available on the Intel Local Control Panel. The ® Intel Local Control Panel is one of two required control options that can be selected. The other option is the standard control panel.
Page 38: Figure 12. Intel ® Local Control Panel
Two bezels are available. One fits a system that has the ® standard control panel installed. The other is used for a chassis with the other Intel Local Control Panel. Each bezel provides a lock to secure the hard drive and optical drive area.
Page 39: Figure 13. Front Panel Features And Peripherals
The server system supports 2.5 inch SAS or Serial ATA (SATA) hot-swap drives. With the mini control panel, the system can support up to eight 2.5 inch hard drives. With the ® standard control panel or the Intel Local Control Panel, the system can support up to six 2.5 inch hard drives.
Page 40: Advanced Management Options
“Installing or Removing a Slimline Optical Drive or Internal USB Floppy”. To use one of the drives provided by Intel, use the following order codes: • Slimline CD-ROM Drive: AXXSCD • Slimline DVD/CDR Drive: AXXDVDCDR ®...
Page 41: Chapter 3: Hardware Installations And Upgrades
® ® Three Intel rack options are available to install the Intel Server System SR1550AL in a rack. The options are the fixed bracket kit, the basic rail kit, and the tool-less rail kit. Only the tool-less rail kit allows you to service the server system while installed in a rack. The other rack options require the system to be removed from the rack before servicing.
Page 42: Fixed Bracket Rack Mount Installation
20. Attach the rear end of the outer rail to the rear bracket with at least one screw. If possible, attach at two places. 21. In the same manner, attach the other rail assembly to the other side. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 43: Basic Rail Rack Mount Removal
(attached to the rack). 9. Engage the matching rails and slide the server chassis into the rack until the two safety stops lock into position. 10. Depress the two safety locks (one on each side). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 44: Figure 14. Front Bezel Supporting The Standard Control Panel
Note: Beware of cables when re-installing the system into the rack so that the cables do not get pulled or interfered with. Removing and Installing the Front Bezel ® The front bezels are available as optional accessories for the Intel Server System SR1550AL. Two front bezel options are available. One is used for the standard control ®...
Page 45: Figure 16. Front Bezel Supporting The Mini Control Panel
Use the steps below if your system includes a front bezel. 1. Unlock the bezel (if locked). 2. Disconnect any cables attached to the control panel. 3. Pull the bezel from the server system. TP02224 Figure 17. Removing the Front Bezel ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 46: Figure 18. Installing The Front Bezel
Use the steps below if your system includes either the standard front bezel or the front ® bezel for the Intel Local Control Panel. The front bezel is optional. 1. At each end of the bezel, line up the center notch on the bezel with the center guide on the rack handles.
Page 47: Figure 19. Removing The Server System Cover
3. (Optional) Insert the security screw at the center of the top cover (see letter “B”). 4. Reconnect all peripheral devices and the AC power cord. TP02219 Figure 20. Installing the Server System Cover ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 48: Figure 21. Removing The Processor Air Duct
3. Remove the server system cover. For instructions, see “Removing the Chassis Cover”. 4. Lift the processor air duct from its location over the two processor sockets. TP02225 Figure 21. Removing the Processor Air Duct ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 49: Figure 22. Removing The Processor 2 Air Dam (Optional - Only If Two Processors Are Installed)
7. Install the server system cover. For instructions, see “Installing the Server System Cover”. 8. Plug all peripheral devices and the AC power cable into the server. TP02226 Figure 23. Installing the Processor Air Duct ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 50: Figure 24. Installing The Memory
5. Locate the DIMM sockets (see Figure 24). DIMM B2 DIMM C1 Socket Socket DIMM B1 DIMM C2 Socket Socket DIMM A2 DIMM D1 Socket Socket DIMM A1 DIMM D2 Socket Socket TP02072 Figure 24. Installing the Memory ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 51: Removing Dimms
(1) Touch the metal chassis before touching the processor or server board. Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the processor. (2) Avoid moving around unnecessarily. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 52: Figure 25. Lifting The Processor Socket Handle
Note: Do not touch the socket pins; they are very sensitive and easily damaged. 7. Line up the alignment marks on the processor and the socket, and insert the processor into the socket. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 53: Figure 27. Removing The Socket Cover
2. Loosely screw in the captive screws on the heat sink corners in a diagonal manner. Do no fully tighten one screw before tightening another. 3. Gradually and equally tighten each captive screw until each is firmly tightened. TP02328 Figure 28. Installing the Heat Sink ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 54: Removing A Processor
To avoid possible damage to your server system, do not use older style drive carriers. Note: The server system does not support all hard drives. See “Server System References“ an Internet link to a list of supported hardware. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 55: Figure 29. Removing Hot-Swap Disk Carrier From The Server System
7. Align the holes in the drive to the holes in the drive carrier and attach it to the carrier with the screws that were attached to the plastic retention device. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 56: Figure 30. Installing Hard Drive Into Carrier
10. Install the server system cover. For instructions, see “Installing the Server System Cover”. 11. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”. 12. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 57: Removing A Sas/Sata Hot-Swap Hard Disk Drive
AC power cord from the system or wall outlet. To maintain proper system cooling, a filler blank must be installed if you do not install a device at this location. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 58: Figure 32. Installing The Interposer Board To The Optical Drive
8. Verify that the blue release lever on the tray locks into place. 9. (Optional) For installing the optional USB floppy drive, note the location of the backplane USB connector and refer to the documentation that came with the device. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 59: Figure 33. Installing An Optical Drive Assembly Into The Server System
“Removing the Chassis Cover”. 5. Press the blue release lever (see letter “A”) to unlock the optical drive tray and remove the slimline optical drive tray assembly from the server system as shown in Figure ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 60: Figure 34. Removing The Slimline Optical Drive Assembly From The Server System
2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see “Removing the Chassis Cover”. 4. Remove the processor air duct by lifting straight up. 5. Disconnect any cables attached to any add-in cards. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 61: Figure 35. Removing Pci Riser Assembly From The Server System
1. Lower the riser assembly into place (see letter “A”). 2. Align the three hooks in the riser assembly with the matching slots at the back of the server system (see letter “B”). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 62: Figure 36. Installing Pci Riser Assembly Into The Server System
5. Re-install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 6. Install the server system cover. For instructions, see “Installing the Server System Cover”. 7. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 63: Replacing The Pci Express* Riser Card With The Pci-X* Riser Card
(see letter “B” in the figure below) and remove from the server system (see letter “C” in the figure below). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 64: Figure 37. Removing The Pcie* Riser Card From The Server System
14. Re-install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 15. Install the server system cover. For instructions, see “Installing the Server System Cover”. 16. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 65: Figure 38. Installing The Pci-X* Riser Card Into The Server System
15. Re-install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 16. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 66: Figure 39. Installing An Add-In Card
9. Close both retention clips. Note: Make sure that all empty add-in card slots have filler panels installed. 10. Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 67: Figure 40. Removing An Add-In Card
“Installing the PCI Riser Assembly”. 10. Install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 11. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 68: Figure 41. Installing The I/O Expansion Module(S) To The Server Board
Figure 41. Installing the I/O Expansion Module(s) to the Server Board 7. Install the PCI riser assembly into the server system. For instructions, see “Installing the PCI Riser Assembly”. 8. Install the processor air duct. For instructions, see “Installing the Processor Air Duct”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 69: Figure 42. Removing The I/O Expansion Module(S) From The Server Board
9. Install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 10. Install the server system cover. For instructions, see “Installing the Server System Cover”. 11. Plug all peripheral devices and the AC power cable(s) into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 70: Figure 43. Installing The Intel ® Rmm And The Intel ® Rmm Nic Module To The Server System
® 8. Insert the standoff into the hole labeled TH4 on the Intel RMM board (see letter ® “E” in the figure below). The standoff installs on the bottom side of the Intel RMM board. ® 9. Attach the Intel RMM board to the server board connector and snap the standoff into the matching hole on the server board.
Page 71: Removing The Intel ® Rmm And Intel ® Rmm Nic
8. Install the ntel RMM NIC module cover into the system back panel (see letter “D” in the figure below). AF000900 ® ® Figure 44. Removing the Intel RMM and the Intel RMM NIC Module from the Server System ® Intel...
Page 72: Replacing The Mid-Plane Board
9. Unscrew the thumbscrew (see letter “A” in the figure below). Hold the mid-plane board only by the edges. Slide the mid-plane board back to release it from the backplane (see letter “B” in the figure below). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 73: Figure 45. Removing The Mid-Plane From The Server System
(see letter “B”). 8. Slide the mid-plane board forward (see letter “C”) and insert the mid-plane into the backplane connector. 9. Tighten the thumbscrew (see letter “D”). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 74: Figure 46. Installing The Mid-Plane Board Into The Server System
AF001496 Figure 46. Installing the Mid-plane Board into the Server System ® 10. Install integrated RAID if necessary. For instructions, see “Installing the Intel Integrated RAID Activation Key and the RAID Mini DIMM”. 11. Install fan pack. For instructions, see “Installing the Fan...
Page 75: Figure 47. Installing The Raid Activation Key And The Raid Mini Dimm
® Installing and Removing the Intel Integrated RAID Activation Key and the RAID Mini DIMM ® Installing the Intel Integrated RAID Activation Key and the RAID Mini DIMM 1. Observe the safety and ESD precautions at the beginning of this book. See “Safety...
Page 76: Figure 48. Removing The Intel ® Integrated Raid Activation Key And The Raid Mini Dimm
“B” in the figure below) and pulling the DIMM out of the socket (see letter “C” in the figure below). AF000905 ® Figure 48. Removing the Intel Integrated RAID Activation Key and the RAID Mini DIMM 7. Install the server system cover. For instructions, see “Installing the Server System...
Page 77: Figure 49. Installing The Raid Battery Backup Unit
Figure 49. Installing the RAID Battery Backup Unit 8. Install the power distribution board cover. For instructions, see “Replacing the Power Distribution Module”. 9. Install the server system cover. For instructions, see “Installing the Server System Cover”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 78: Figure 50. Removing The Raid Battery Backup Unit
7. Install the power distribution board cover. For instructions, see “Replacing the Power Distribution Module”. 8. Install the server system cover. For instructions, see “Installing the Server System Cover”. 9. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 79: Figure 51. Installing The Server Board
7. Place the server board into the server system as shown in the figure below (see letter “A”). 8. Attach the server board with six screws (see letter “B”). TP02253 Figure 51. Installing the Server Board ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 80: Removing The Server Board
“Removing the Fan Pack”. 9. Disconnect power from the server board. 10. Remove the six screws from the server board (see letter “A”) and lift the server board from the server system (see letter “B”). ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 81: Figure 52. Removing The Server Board
13. Install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 14. Install the server system cover. For instructions, see “Installing the Server System Cover”. 15. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 82: Replacing The Backup Battery
Varning: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. Varoitus: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 83: Figure 53. Replacing The Backup Battery
8. Remove the new lithium battery from its package, and, being careful to observe the correct polarity, insert it in the battery socket. 9. Close the chassis. 10. Run Setup to restore the configuration settings to the RTC. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 84: Figure 54. Removing Power Supply Filler Panel From The Server System
Figure 54. Removing Power Supply Filler Panel from the Server System 5. If a power supply is installed, release the latch (see letter “A”) and remove the power supply by pulling on the handle (see letter “B”) as shown in the figure below. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 85: Figure 55. Removing Power Supply Module From The Server System
7. If no power supply is to be installed, insert a power supply filler panel. 8. Install the server system cover. For instructions, see “Installing the Server System Cover”. 9. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 86: Figure 57. Removing The Power Distribution Board Cover
9. Install a new power distribution board by lining up the standoffs to the holes in the power distribution board and sliding the board to the left. 10. Reconnect the power connections to the system boards. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 87: Figure 58. Installing The Power Distribution Board Cover
“Replacing or Adding a Power Supply”. 13. Install the server system cover. For instructions, see “Installing the Server System Cover”. 14. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 88: Figure 59. Removing Mini Control Panel Module From The Server System
Note: If you replace the mini control panel, your system is now limited to six hard drives. ® The steps for replacing the standard control panel and the Intel Local Control Panel are nearly identical. Use the steps below for both varieties of the control panel. Where necessary, differences between the two control panels are noted.
Page 89: Figure 60. Installing Control Panel Module Into The Server System
11. Install the server system cover. For instructions, see “Installing the Server System Cover”. 12. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”. 13. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 90: Figure 62. Removing The Standard Control Panel From The Server System
Reinstalling the Mini Control Panel Your system comes with a mini control panel installed. You can remove this and replace it ® with a standard control panel or the Intel Local Control Panel. If your system has a ® standard control panel or the Intel Local Control Panel installed and you wish to reinstall the mini control panel, follow the instructions below.
Page 91: Figure 63. Removing Mini Control Panel Filler From The Server System
10. Install the server system cover. For instructions, see “Installing the Server System Cover”. 11. (Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”. 12. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 92: Figure 65. Removing A System Fan
® The system fans at the front of the Intel Server System SR1550AL can be individually replaced if one of them fails. Use the steps below to replace either a dual rotor fan or a single rotor fan.
Page 93: Figure 66. Installing A System Fan
“Removing the Processor Air Duct”. 5. Remove the power distribution board cover. For instructions, see “Replacing the Power Distribution Module”. 6. Disconnect the IDE cable from the backplane. 7. Remove the bridge board. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 94: Figure 67. Removing The Fan Pack
9. Press latch (see letter “B”) and slide fan pack to the left (see letter “C”) as shown in the figure below. 10. Lift up to remove the fan pack as shown in the figure below (see letter “D”). AF001497 Figure 67. Removing the Fan Pack ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 95: Figure 68. Installing The Fan Pack
6. Install the processor air duct. For instructions, see “Installing the Processor Air Duct”. 7. Install the server system cover. For instructions, see “Installing the Server System Cover”. 8. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 96: Figure 69. Installing The Rack Handle
Removing the Rack Handles 1. Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”. 2. Power down the server and unplug all peripheral devices and the AC power cable. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 97: Figure 70. Removing The Rack Handle
Figure 70. Removing the Rack Handle 6. Install the server system cover. For instructions, see “Installing the Server System Cover”. 7. Plug all peripheral devices and the AC power cable into the server. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 98 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 99: Chapter 4: Server Utilities
You can run BIOS Setup with or without an operating system ® being present. See “Server System References” for a link to the Intel 5000 Series Chipsets Server Board Family Datasheet where you will find details about specific BIOS setup screens.
Page 100: Table 4. Setup Menu Key Use
If "No" is selected and the <Enter> key is pressed, or if the <Esc> key is pressed, the user is returned to where they were before <F9> was pressed without affecting any existing field values. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 101: Upgrading The Bios
Press <F2> Key if you want to run SETUP 2. Write down the current settings in the BIOS Setup program. Note: Do not skip step 2. You will need these settings to configure your server at the end of the procedure. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 102: Upgrading The Bios
2. Open the server chassis. 3. Move the jumper from the normal operation position, Password Clear Protect, at pins 1 and 2 to the Password Clear Erase position, covering pins 2 and 3. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 103: Figure 71. Clear Password Jumper
2. Open the server. 3. Move the jumper from the normal operation position, CMOS Clear by BMC, at pins 1 and 2 to the CMOS Clear Force Erase position, covering pins 2 and 3. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 104: Figure 72. Clear Cmos Jumper
1 and 2. 6. Close the server chassis. 7. Reconnect the AC power and power up the system. 8. The CMOS is now cleared and can be reset by going into the BIOS setup. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 105: Figure 73. System Cable Routing
Use caution to make sure no cables or wires are pinched and that the airflow from the fans is not blocked. Use the figures below to determine the correct cable routing. Intel ® Remote Management...
Page 106: Figure 74. Sata Cable Installation
TP02249 Figure 74. SATA Cable Installation 750W Single Power Supply Input Voltages • 100-127V at 50/60 Hz; 12 A max. • 200-240V at 50/60 Hz; 6 A max. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 107: 750W Single Power Supply Output Voltages
Warning: Do not exceed a combined power output of 90 Watts for the +5 V and +3.3 V outputs. Exceeding a combined 90 Watts will overload the power subsystem and may cause the power supplies to overheat and malfunction. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 108: System Environmental Specifications
7 Bels in sound power for a typical office ambient temperature (65-75 °F). Your selection of peripherals may change the noise level. Electrostatic Tested to 15 kilovolts (kV); no component damage. discharge (ESD) ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 109: Appendix B: Troubleshooting
In addition to the server firmware and files, also update any drivers used for components you have installed in your system, such as video drivers, network drivers, and SATA drivers. Intel provides a package called the "Platform Confidence Test" that may help with your diagnostics. See “Server System References”...
Page 110: Problems Following Initial System Installation
• Are all integrated components from the tested components lists? Check the tested memory, and chassis lists, as well as the supported hardware and operating system list. See “Server System References” for links to the tested component lists. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 111: Hardware Diagnostic Testing
Once the system boots up, the operating system prompt appears on the screen. The prompt varies according to the operating system. If the operating system prompt does not appear, “No Characters Appear on Screen”. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 112: Specific Problems And Corrective Actions
Remove the processor(s) and re-seat them. • Make sure the chassis standoffs are installed only below mounting holes. Misplaced standoffs can contact the pins on the bottom of the server board and cause a short. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 113: No Characters Appear On Screen
Characters Are Distorted or Incorrect Check the following: • Are the brightness and contrast controls properly adjusted on the video monitor? See the manufacturer's documentation. • Are the video monitor's signal and power cables properly installed? ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 114: System Cooling Fans Do Not Rotate Properly
Light Check the following: • Are the CD-ROM/DVD-ROM drive's power and signal cables properly installed? • Are all relevant switches and jumpers on the drive set correctly? • Is the drive properly configured? ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 115: Cannot Connect To A Server
Make sure the other adapter supports shared interrupts. Make sure your operating system supports shared interrupts. • Try reseating the add-in adapter. The add-in adapter stopped working without apparent cause • Reseat the adater. • Put the adapter in a different slot. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 116: System Boots When Installing Pci Card
If you are running the software from a CD-ROM or DVD-ROM, try a different disk. • Check your system for a virus infection. • Uninstall and reinstall the software. Make sure all necessary files are installed. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 117: Devices Are Not Recognized Under Device Manager (Microsoft* Windows* Operating System)
(Microsoft* Windows* Operating System) The Microsoft* Windows* operating systems do not include all of the drivers for the ® Intel chipsets, onboard NICs, and other components. See “Server System References” for a link to the current drivers and chipset files.
Page 118: Led Information
LED Information ® The Intel Server Board S5000PAL includes LEDs that can aid in troubleshooting your system. A table of these LEDs with a description of their use is listed below. Table 8. LED Information LED Name Function Location LED Color...
Page 119: Table 10. Error Beep Codes Generated By Intel
® In addition to the beep codes above, additional beep codes are provided if an Intel ® Remote Management Module is installed. The Intel Remote Management Module provides the following additional beep codes. ® Table 10. Error Beep Codes Generated by Intel...
Page 120 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 121: Appendix C: Intel ® Server Issue Report Form
Appendix C: Intel Server Issue Report Form Note: An on-line / automatic submission version of this form is available at http:// support.intel.com/support/motherboards/server/chassis/SR1550/. For the fastest service, please submit your form via the Internet. Date Submitted: _______________________________________________________ Company Name: ______________________________________________________ Contact Name: ________________________________________________________...
Page 122: Operating System Information
Revision PCI-X* Top PCI Slot Middle PCI Slot Bottom PCI Slot PCIe* x4 Top PCI Slot Middle PCI Slot Bottom PCI Slot PCIe x8 Top PCI Slot Middle PCI Slot Bottom PCI Slot ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 123 Drive Type (SCSI, Hot-swap Make/Model SATA, etc) or Fixed Revision Management Information On-Board Platform Instrumentation only ___________________________________ ® Intel Remote Management Module _______________________________________ Control Panel Information Standard Control Panel _________________________________________________ ® Intel Local Control Panel_______________________________________________ Mini Control Panel_____________________________________________________ ® Intel...
Page 124 Please also include any details on troubleshooting already done. ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 125: Appendix D: Led Decoder
Appendix D: LED Decoder During the system boot process, BIOS executes a number of platform configuration processes, each of which is assigned a specific hex POST code number. As each configuration routine is started, BIOS will display the given POST code to the POST Code Diagnostic LEDs found on the back edge of the server board.
Page 126: Figure 75. Diagnostic Led Placement Diagram
Detecting presence of memory 0x24h Programming timing parameters in the memory controller 0x25h Configuring memory parameters in the memory controller 0x26h Optimizing memory controller settings 0x27h Initializing memory, such as ECC init 0x28h Testing memory ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 127 Resetting the console controller 0x79h Disabling the console controller 0x7Ah Enabling the console controller Keyboard (PS2 or USB) 0x90h Resetting the keyboard 0x91h Disabling the keyboard 0x92h Detecting the presence of the keyboard ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 128 Trying boot device selection 0xD4 Trying boot device selection 0xD5 Trying boot device selection 0xD6 Trying boot device selection 0xD7 Trying boot device selection 0xD8 Trying boot device selection 0xD9 Trying boot device selection ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 129 Exiting Sleep state 0xF8h Operating system has requested EFI to close boot services (ExitBootServices ( ) has been called) 0xF9h Operating system has switched to virtual address mode (SetVirtualAddressMap ( ) has been called) ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 130 Crisis recovery has been initiated because of a user request 0x31h Crisis recovery has been initiated by software (corrupt flash) 0x34h Loading crisis recovery capsule 0x35h Handing off control to the crisis recovery capsule 0x3Fh Unable to complete crisis recovery. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 131: Appendix E: Getting Help
Telephone All calls are billed per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel reserves the right to change the pricing for telephone support at any time without notice). ® Before calling, fill out an “Intel...
Page 132: Latin America
Easter Island....Contact AT&T USA at 800 800 311. Once connected, dial 800 843 4481 Mainland and Juan .. Contact AT&T USA at 800 225 288. Once connected, dial 800 843 4481 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 133 Panama..Contact AT&T USA at 00 800 001 0109. Once connected, dial 800 843 4481 Paraguay ... 001 916 377 0114 Peru ... 001 916 377 0114 Uruguay..001 916 377 0114 Venezuela... Contact AT&T USA at 0 800 2255 288. Once connected, dial 800 843 4481 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 134 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 135: Appendix F: Regulatory And Compliance Information
(or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. The final configuration of your end system product may require additional EMC compliance testing. For more information, please contact your local Intel representative.
Page 136: Product Emc Compliance - Class A Compliance
This server system has been tested and verified to comply with the following electromagnetic compatibility (EMC) regulations when installed in a compatible Intel® host system. For information on compatible host system(s) refer to Intel's Server Builder Web site or contact your local Intel representative.
Page 137: Certifications / Registrations / Declarations
IRAM Certification (Argentina) • CNCA Certification (China) • Ecology Declaration (International) Product Regulatory Compliance Markings ® This Intel server system product is provided with the following regulatory marks. Table 13. Product Regulatory Compliance Markings Regulatory Compliance Region Marking cULus Listing Marks...
Page 138: Electromagnetic Compatibility Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 139: Industry Canada (Ices-003)
For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 140: Europe (Ce Declaration Of Conformity)
Following is the RRL certification information for Korea. English translation of the notice above: 1. Type of Equipment (Model Name): On License and Product 2. Certification No.: On RRL certificate. Obtain certificate from local Intel representative 3. Name of Certification Recipient: Intel Corporation ®...
Page 141: Cnca (Ccc-China)
Updated product information for configurations can be found on the Intel Server Builder Web site at the following URL: http://channel.intel.com/go/serverbuilder If you do not have access to Intel's Web address, please contact your local Intel representative. •...
Page 142: Restriction Of Hazardous Substances (Rohs) Compliance
Restriction of Hazardous Substances (RoHS) Compliance Intel has a system in place to restrict the use of banned substances in accordance with the European Directive 2002/95/EC. Compliance is based on declaration that materials banned in the RoHS Directive are either (1) below all applicable substance threshold limits or (2) an approved/pending RoHS exemption applies.
Page 143: Appendix G: Warranty
"as is" unless specifically provided for otherwise in any software license accompanying the software. If any Product furnished by Intel which is the subject of this Limited Warranty fails during the warranty period for reasons covered by this Limited Warranty, Intel, at its option, will: •...
Page 144: Warranty Limitations And Exclusions
Limitations of Liability Intel's responsibility under this, or any other warranty, implied or expressed, is limited to repair, replacement, or refund, as set forth above. These remedies are the sole and exclusive remedies for any breach of warranty.
Page 145: How To Obtain Warranty Service
Telephone Support If you cannot find the information you need on Intel's World Wide Web site (http:// www.intel.com/), call your local distributor or an Intel Customer Support representative.
Page 146 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 147: Appendix H: Installation/Assembly Safety Instructions
5. Provide some electrostatic discharge (ESD) protection by wearing an antistatic wrist strap attached to chassis ground of the system-any unpainted metal surface-when handling components. 6. Do not operate the system with the chassis covers removed. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 148 • Provided with a properly grounded wall outlet. • Provided with sufficient space to access the power supply cord(s), because they serve as the product's main power disconnect. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 149: Deutsch
Anschlußkabel von den I/O Anschlüssen oder Ports ab. 5. Tragen Sie ein geerdetes Antistatik Gelenkband, um elektrostatische Ladungen (ESD) über blanke Metallstellen bei der Handhabung der Komponenten zu vermeiden. 6. Schalten Sie das System niemals ohne ordnungsgemäß montiertes Gehäuse ein. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 150 Schutzhandschuhe tragen. Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 151: Français
Notez que le commutateur CC de mise sous tension /hors tension du panneau avant n'éteint pas l'alimentation CA du système. Pour mettre le système hors tension, vous devez débrancher chaque câble d'alimentation de sa prise. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 152 Le microprocesseur et le dissipateur de chaleur peuvent être chauds si le système a été sous tension. Faites également attention aux broches aiguës des cartes et aux bords tranchants du capot. Nous vous recommandons l'usage de gants de protection. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 153: Español
No intente modificar ni usar el cable de alimentación de corriente alterna, si no corresponde exactamente con el tipo requerido. El número de cables suministrados se corresponden con el número de fuentes de alimentación de corriente alterna que tenga el producto ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 154 4. Inserte el bloqueo de seguridad en el sistema y bloquéelo para impedir que pueda accederse al mismo sin autorización. 5. Conecte todos los cables externos y los cables de alimentación CA al sistema. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 155 • "Provisto de una toma de tierra correctamente instalada. • "Provisto de espacio suficiente como para acceder a los cables de alimentación, ya que éstos hacen de medio principal de desconexión del sistema. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 156: Italiano
1. Aprire e rimuovere il lucchetto dal retro del sistema qualora ve ne fosse uno installato. 2. Togliere e mettere in un posto sicuro tutte le viti delle coperture. 3. Togliere le coperture. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 157 • "Dotata di una presa a muro correttamente installata. • "Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 158 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 159: Appendix I: Safety Information
To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warnings and precautions in ® this guide before installing or maintaining your Intel server product. In the event of a conflict between the information in this document and information provided with the product or on the website for a particular product, the product documentation takes precedence.
Page 160: Intended Application Uses
Conform to local occupational health and safety requirements when moving and lifting equipment. • Use mechanical assistance or other suitable assistance when moving and lifting equipment. • To reduce the weight for easier handling, remove any easily detachable components. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 161: Power And Electrical Warnings
Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate AC cord is required for each system power supply. ® Some power supplies in Intel servers use Neutral Pole Fusing. To avoid risk of shock use caution when working with power supplies that use Neutral Pole Fusing.
Page 162: System Access Warnings
To avoid risk of potential electric shock, a proper safety ground must be implemented for the rack and each piece of equipment installed in it. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 163: Electrostatic Discharge (Esd)
Caution: To avoid risk of radiation exposure and/or personal injury: • Do not open the enclosure of any laser peripheral or device • Laser peripherals or devices have are not user serviceable • Return to manufacturer for servicing ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 164: Deutsch
Deutsch Sicherheitshinweise für den Server ® ® Das vorliegende Dokument bezieht sich auf Intel Serverplatinen, Intel Servergehäuse (Standfuß und Rack) sowie installierte Peripheriegeräte. Es enthält Warnungen und Vorsichtsmaßnahmen zur Vermeidung von Gefahren durch Verletzung, Stromschlag, Feuer und Beschädigungen von Geräten. Lesen Sie diese Dokument daher sorgfältig, ®...
Page 165: Zielbenutzer Der Anwendung
Verwenden Sie mechanische oder andere geeignete Hilfsmittel zum Transportieren oder Anheben von Geräten. • Entfernen Sie alle Komponenten, die sich leicht abnehmen lassen, um das Gewicht zu reduzieren und die Handhabung zu erleichtern. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 166: Warnungen Zu Netzspannung Und Elektrizität
Typ entspricht. Jedes Netzteil im System muß über ein eigenes Netzkabel angeschlossen werden. Einige Netzteile von Intel Servern verwenden Nullleitersicherungen. Vorsicht ist geboten im Umgang mit Netzteilen, welche Nullleitersicherungen verwenden, um das Risiko eines elektrischen Schlages zu vermeiden Das Netzteil in diesem Produkt enthält keine Teile, die vom Benutzer gewartet werden...
Page 167: Warnhinweise Für Den Systemzugang
Gehen Sie bei der Installation von Geräten im Rack immer von unten nach oben vor, und bauen Sie das schwerste Gerät an der untersten Position im Rack ein. Ziehen Sie jeweils immer nur ein Gerät aus dem Rack heraus. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 168: Elektrostatische Entladungen (Esd)
Inbetriebnahme des Systems ohne Abdeckung kann zur Beschädigung von Systemkomponenten führen. So bringen Sie die Abdeckung wieder an: • Vergewissern Sie sich zunächst, daß Sie keine Werkzeuge oder Teile im Gehäuse vergessen haben. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 169: Français
® d’installer ou de mettre à jour votre produit serveur Intel En cas de conflit entre les informations fournies dans ce document et celles livrées avec le produit ou publiées sur le site Web pour un produit particulier, la documentation du produit prime.
Page 170: Domaines D'utilisation Prévus
Bien ventilé et à l’écart des sources de chaleur telles que la lumière directe du soleil et les radiateurs. • À l’écart des sources de vibration ou des chocs physiques. • Isolé des champs électromagnétiques importants produits par des appareils électriques. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 171: Pratiques De Manipulation De L'équipement
Vous devez les débrancher avant d’ouvrir le châssis, d’ajouter ou de supprimer un composant non connectable à chaud. Les alimentations de certains serveurs Intel sont munies de doubles fusibles pôle/neutre: veuillez observer les précautions d'usage afin d'éviter tout risque d'eléctrocution.
Page 172: Avertissements Sur Le Cordon D'alimentation
Éteignez le système en appuyant sur le bouton d’alimentation. • Déconnectez l’alimentation secteur en débranchant tous les cordons d’alimentation secteur du système ou de la prise murale. • Déconnectez l’ensemble des câbles et lignes de télécommunication qui sont connectés au système. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 173: Avertissements Sur Le Montage En Rack
étiqueté comme contrôlant toute l’unité, et pas uniquement le ou les serveurs. Pour éviter tout risque d’électrocution, le rack et chaque élément de l’équipement installé dans le rack doivent être correctement reliés à la terre. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 174: Décharges Électrostatiques (Esd)
Vérifiez tout d’abord que vous n’avez pas oublié d’outils ou de composants détachés à l’intérieur du système. • Vérifiez que les câbles, les cartes d’extension et les autres composants sont correctement installés. • Fixez les panneaux au châssis en suivant les instructions du produit. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 175: Périphériques Laser
Español Información de seguridad del servidor Este documento se aplica a las tarjetas de servidor de Intel®, las carcasas de servidor de Intel® (montaje en bastidor y en pedestal) y los dispositivos periféricos. Para reducir el riesgo de daños corporales, descargas eléctricas, fuego y en el equipo, lea este documento y preste atención a todos las advertencias y precauciones de esta guía antes de instalar o...
Page 176: Aplicaciones Y Usos Previstos
Provista de una toma de corriente alterna correctamente conectada a tierra. • Provista de espacio suficiente para acceder a los cables de la fuente de alimentación ya que constituyen la desconexión principal de la alimentación. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 177: Manipulacién Del Equipo
CA estén desenchufado antes de abrir la carcasa, agregar o extraer cualquier componente que no es de conexión en funcionamiento. Algunas fuentes de alimentación de electricidad de los servidores de Intel utilizan el polo neutral del fuselaje. Para evitar riesgos de choques electricos use precauciónes al trabajar con las fuentes de alimentación que utilizan el polo neutral de fuselaje.
Page 178: Advertencias El Acceso Al Sistema
Devuélvala al fabricante para repararla. • Apague el servidor y desconecte todos los cables de alimentación antes de agregar o reemplazar cualquier componente que no es de conexión en funcionamiento. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 179: Advertencias Sobre El Montaje En Bastidor
Precaución: Las descargas electrostáticas pueden dañar las unidades de disco, las tarjetas y otros componentes. Recomendamos que realice todos los procedimientos en una estación de trabajo protegida contra descargas electrostáticas. En caso de que no haya una ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 180: Otros Riesgos
Compruebe primero que no ha dejado herramientas o piezas sueltas dentro del sistema. • Compruebe que los cables, tarjetas adicionales y otros componentes están instalados correctamente. • Sujete las cubiertas a la carcasa siguiendo las instrucciones del producto. ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 181 Precaución Para evitar el riesgo de la exposición a radiaciones o de daños personales: • No abra la caja de ningún periférico o dispositivo láser • Los periféricos o dispositivos láser no pueden ser reparados por el usuario • Haga que el fabricante los repare ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...
Page 182 ® Intel Server System SR1550AL/SR1550ALSAS User’s Guide...

This manual is also suitable for:

Sr1550alsas

Intel SR1550AL - Server System - 0 MB RAM User Manual

Preface

Safety Information

Chapter 1: Server System References

Chapter 2: Server System Features

Chapter 3: Hardware Installations and Upgrades

Chapter 4: Server Utilities

Appendix A: Technical Reference

Appendix B: Troubleshooting

Appendix C: Intel ® Server Issue Report Form

Appendix D: LED Decoder

Appendix E: Getting Help

Appendix F: Regulatory and Compliance Information

Appendix G: Warranty

Appendix H: Installation/Assembly Safety Instructions

Appendix I: Safety Information

Quick Links

Related Manuals for Intel SR1550AL - Server System - 0 MB RAM

Summary of Contents for Intel SR1550AL - Server System - 0 MB RAM