6. Insert the replacement power supply at an angle into the server system, sliding the
power connector side in first to fit it through the cut-out area at the rear of the
system (see letter "A" in the following figure).
Set the front of the power supply down pushing the power supply back so it fits
behind the foot at the bottom of the chassis (see letter "B").
Insert the screw you removed in previously to attach the power supply to the server
system (see letter "C").
C
B
A
B
AF000995
Figure 75. Installing Power Supply into the Server System (SR1530CL)
®
74
Intel
Server System SR1530CL / SR1530HCL / SR1530HCLS