Figure 50. Installing The Optical Drive Into The Server System (Sr1530Cl); Figure 51. Installing Pci Cooling Fan (Sr1530Cl) - Intel SR1530CL User Manual

9. Slide the optical drive assembly in through the front of the chassis, as shown by
letter "A in the following figure. Secure the optical drive to the chassis with a screw
(see letter "B"). Route the power cable through the clip in front of the system fans
and connect it to the power connector on the optical drive (see letter "C"). Connect
the data cable to the optical drive and to the IDE connector on the server board (see
letter "D").
A

Figure 50. Installing the Optical Drive into the Server System (SR1530CL)

10. Install the PCI cooling fan onto the mounting pegs that are located behind the
optical drive bay. The fan label should face the rear of the system. See letter "A" in
the following figure.
11. Install the server system cover. For instructions, see
Cover" on page
12. Optional: Install the front bezel. For instructions, see
on page
13. Plug all peripheral devices and the AC power cable into the server.
52
A

Figure 51. Installing PCI Cooling Fan (SR1530CL)

29.
27.
®
Intel
B
C
D
"Installing the Server System
"Installing the Front Bezel"
Server System SR1530CL / SR1530HCL / SR1530HCLS
D
C
AF000980
AF000989