Removing A Pci Add-In Card; Figure 68. Installing An Add-In Card - Intel SR1530CL User Manual

8. Re-install the screw you removed in step 5. See letter "A" in the figure.
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
10. Install the server system cover. For instructions, see
Cover" on page
11. Plug all peripheral devices and the AC power cable into the server.

Removing a PCI Add-in Card

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the PCI riser assembly. For instructions, see
Assembly" on page
5. Remove the screw at the rear of the riser assembly. See letter "A" in
Save this screw. You will use it later.
6. Pull the add-in card from the socket in the riser assembly. You may need to wriggle
the card from front to back to remove it, but use caution to not twist or bend the
card. See letter "B" in the figure.
7. Install a filler panel over the opening at the rear of the riser assembly. See letter "C"
in the figure.
66

Figure 68. Installing an Add-In Card

29.
iii.
28.
61.
®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
B
C
AF000983
62.
"Installing the Server System
"Removing the Server
"Removing the PCI Riser
A
"Safety
Figure 69.