7. Orient the processor with the socket so the processor cutouts match the socket
notches (see letter "A" in the following figure). Set the processor into place as
shown in letter B.
Note: Make sure the alignment triangle mark and the alignment triangle cutout align correctly.
8. Remove the protective socket cover.
Note: Retain the protective socket cover for use when removing a processor that will not be
replaced.
9. Lower the CPU load plate.
10. Lower the socket lever.
11. Install the heat sink. For instructions, see
38
A
Figure 32. Installing the Processor
Figure 33. Removing the Protective Socket Cover
®
Intel
Server System SR1530CL / SR1530HCL / SR1530HCLS
B
A
B
AF000652
"Installing the Heat Sink" on page
AF000654
39.