8. Re-install the screw you removed in step 5. See letter "A" in the figure.
Note: Make sure that all empty add-in card slots have filler panels installed.
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
10. Install the processor air duct. For instructions, see
Duct" on page
11. Install the server system cover. For instructions, see
Cover" on page
12. Plug all peripheral devices and the AC power cable into the server.
Installing and Removing the Server Board
Installing the Server Board
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCI riser assembly. For instructions, see
Assembly" on page
®
Intel
Server System SR1530CL / SR1530HCL / SR1530HCLS
Figure 69. Removing an Add-In Card
32.
29.
iii.
28.
31.
61.
C
B
AF000984
62.
"Installing the Processor Air
"Installing the Server System
"Removing the Server
"Removing the Processor Air
"Removing the PCI Riser
A
"Safety
67