Installing A Slimline Optical Drive (Sr1530Hcl/Sr1530Hcls); Figure 52. Attaching The Interposer Board (Sr1530Hcl/Sr1530Hcls) - Intel SR1530CL User Manual

Installing a Slimline Optical Drive (SR1530HCL/
SR1530HCLS)
Note: If you are replacing an optical drive, see
(SR1530CL)" on page 56
Note: The hardware necessary to install your optical drive was shipped to you in a bag labeled
"CD-ROM Assy".
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the bezel if it is installed. For instructions, see
Bezel" on page
5. Attach the interposer board to the rear of the CD-ROM or DVD-ROM drive, using
two screws, as shown by the following figure.

Figure 52. Attaching the Interposer Board (SR1530HCL/SR1530HCLS)

®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
"Removing a Slimline Optical Drive
for instructions first. Return to these steps when directed.
iii.
28.
26.
"Removing the Server
"Removing the Front
B
A
AF001186
"Safety
53