Removing A Pci Riser Card; Installing A Pci Riser Card; Installing And Removing A Slimline Optical Drive; Figure 48. Removing The Pci Riser Card - Intel Server System R1000GZ Service Manual

Hardware Installations and Upgrades
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
Note: To eliminate the possibility of installing the replacement connector on the wrong side of the
PCI riser assembly, replace one connector at a time.

Removing a PCI Riser Card

1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
3. Remove any add-in cards from the PCI riser card. For instructions, see
in Card".
4. Remove the two screws securing the PCI Riser Card (see letter "A").
5. Remove from the riser card from riser assembly (see letter "B").

Installing a PCI Riser Card

1. Place the riser card onto the riser assembly (see letter "A").
2. Secure the riser card using the two screws (see letter "B").

Installing and Removing a Slimline Optical Drive

Caution: The slimline optical drive is NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
30

Figure 48. Removing the PCI Riser Card

Figure 49. Installing the PCI Riser Card

"Removing the PCI Riser
"Removing a PCI Add-
®®
Intel Server System R1000GZ/GL Service Guide
Assembly".