Denso BHT-904BB User Manual page 98

BHT-904BB
Use the following procedure if necessary to change the communication environment settings
1.
Select "5: COMMUNICATION" at the SET SYSTEM menu and
then press the ENT key.
The SET COMMUNICATION menu screen displays as shown on the
right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to
highlight the item to be set and press the ENT key.
"1: OPTICAL":
Changes the infrared communication parameters.
"2: CONNECTOR":
Changes the setting of the USB communication parameters.
"3: COM PORT":
Changes the communication port setting.
"4: PROTOCOL TYPE":
Changes the communication protocol setting.
"5: OPEN "COM:" DETAIL":
Changes the communication condition setting for the user program (OPEN "COM:") created via the
BHT-BASIC.
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the SYSTEM MENU.
"1: OPTICAL": Infrared communication parameters
1.
Select "1: OPTICAL" at the SET COMMUNICATION menu and
then press the ENT key.
The SET OPTICAL menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight
"1: PARAMETER" or "2: PROTOCOL", and then press the ENT
key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1: PARAMETER": Setting the communication parameters
Select "1: PARAMETER" to display the screen shown on the right.
The highlighted setting will be the current setting.
"1: TRANSMIT SPEED": Setting the transmission speed
To change the setting, use the highlight the transmission speed with
the cursor keys ([◄] [►]) and press the ENT key.
Press the Backspace/clear key to return to the SET OPTICAL menu.
82