Denso BHT-904BB User Manual page 151

Specifying file transfer protocol options
1.
Select "5: SPP PARAMETER" at the SET BLUETOOTH menu and
then press the ENT key.
The current settings of the items are displayed.
"1: SERIAL No.":
"ON": Enables the addition of serial number to the data block.
"OFF": Disables the addition of serial number to the data block.
"2: H.PARITY":
"ON": Enables the addition of horizontal parity.
"OFF": Disables the addition of horizontal parity.
"3: LINKUP TIME":
Sets the timeout period (in seconds) to be applied when a data link is established.
"4: FIELD SPACE":
"Ignore": Ignores the trailing spaces in fields.
"Data": Retains the trailing spaces as data.
When changing the setting
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to highlight the desired setting item.
(2) Press the cursor keys ([◄] [►]) to highlight the desired setting.
(3) Press the ENT key.
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
The BHT-Ir protocol or Ymodem protocol ignores the serial number and horizontal parity
− Point −
settings.
Barcode Handy Terminal
135