Denso BHT-904BB User Manual page 115

[10] Setting the operation log
Use the following procedure to set the operation log.
1.
Select "3: OPERATION LOG" at the SET SYSTEM 2/2 menu
and then press the ENT key.
The SET OPERATION LOG menu appears.
The highlighted setting is the current setting.
2.
Use the cursor keys ([◄] [►]) to change the setting and then
press the ENT key.
"ON": An operation log file is created.
"OFF": An operation log file is not created.
3.
Press the ENT key.
The setting is then updated.
Barcode Handy Terminal
ENT key
99