Denso BHT-904BB User Manual page 173

[2] Uploading the system message file
1.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight
[2: UPLOAD] and then press the ENT key.
The screen displays as shown on the right indicating that the BHT is
waiting for the system message file to be uploaded.
2.
While the upload is in progress, the screen screen displays as
shown on the right indicating the file name and the number of sent
records/the total number of records.
Press the Backspace/clear key to abort the upload and return to the
SYSTEM MESSAGE menu.
3.
Upon completion of uploading, the BHT displays the screen shown
on the right and beeps once.
Press the Backspace/clear key to return to the SYSTEM PARAMETER
menu.
The beeper sounds three times if an error occurs during uploading, and
an error screen displays.
Refer to "Chapter 7 Error Messages" – "7.2 System Mode Errors" and remedy the error.
When uploading the system message file, the BHT creates a temporary file named
− Point −
"_B90MSG.FN3" in the user area.
An error will therefore occur if there is insufficient space in the user area to create the
temporary file.
The created temporary file will automatically be deleted after uploading is complete.
Barcode Handy Terminal
157