Denso BHT-904BB User Manual page 94

BHT-904BB
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update the setting and return to the SET BARCODE
menu.
"6: CODE128": Detail setting of the Code 128 reading
1.
Select "6: CODE128" at the SET BARCODE menu and then press the ENT key.
The SET CODE128 screen appears.
"1: MIN":
Sets the minimum number of the Code 128 digits.
Setting range:
"2: MAX":
Sets the maximum number of the Code 128 digits.
Setting range:
Always set the minimum number of digits to a number less than the maximum number of
− Point −
digits. If the minimum number exceeds the maximum number, a read error occurs.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update the setting and return to the SET BARCODE
menu.
"7: RSS": Detail setting of the RSS (GS1 Databar) reading
1.
Select "7: RSS" at the SET BARCODE menu and then press the ENT key.
The SET RSS screen appears.
(RSS-14, RSS-14 Truncated setting)
"1: READING":
Enables or disables reading of the RSS-14 (GS1 Databar
Omnidirectional) or RSS-14 Truncated (GS1 Databar Truncated).
"2: Stacked":
Enables or disables reading of the RSS-14 Stacked (GS1 Databar
Stacked) or RSS-14 Stacked Omnidirectional (GS1 Databar Stacked
Omnidirectional).
− Point − To enable reading of the Stacked type barcode, it is necessary to set both "1: READING"
and "2: Stacked" to ON.
78
1 to 99
1 to 99