Denso BHT-904BB User Manual page 88

BHT-904BB
[3] Read barcode
Select [3: READ CODE] at the OPEN BAR SETTING menu and then
press the Enter key. When the SET BARCODE screen appears, it is
possible to set the barcode reading to ON/OFF. The highlighted settings
are the current settings.
To change the setting, use the cursor keys ([▲] [▼]) or numeric keys ([1]
[2] [3] [4] [5] [6] [7] [8]) to select the desired item and then use the cursor
keys ([◄] [►]) to select the desired setting.
"1: EAN/UPC":
Enables or disables reading of the universal product codes.
"2: ITF":
Enables or disables reading of the interleaved 2of5 (ITF).
"3: CODABAR":
Enables or disables reading of the Codabar (NW-7).
"4: CODE39":
Enables or disables reading of the Code 39
"5: CODE93":
Enables or disables reading of the Code 93.
"6: CODE128":
Enables or disables reading of the Code 128.
"7: RSS":
Enables or disables reading of the RSS (GS1 Databar).
"8: STF":
Enables or disables reading of the standard 2of5 (STF).
When the ENT key is pressed, it is possible to carry out further setting of the selected barcode. For details,
refer to the information below.
Press the Backspace/clear key to update the setting and return to the SET BARCODE menu.
"1: EAN/UPC" and "7: RSS" include multiple barcode types. It is possible, via DETAIL (detail
− Point −
setting), to enable or disable barcode reading for each type. To enable reading, set both this
and the detail settings to ON (enable).
72