Denso BHT-904BB User Manual page 147

Specifying device detection parameters
1.
Select "2: INQUIRY" at the SET BLUETOOTH menu and then
press the ENT key.
The current settings of the items are displayed.
[1: INQUIRY TIME]:
Specifies the duration of the operation in seconds.
[2: NUM RESPONSES]:
Specifies the number of devices for the operation.
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight the desired setting and then
press the ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired setting.
The INQUIRY TIME parameter accepts settings 0 to 255. The default setting is 10 seconds.
The NUM RESPONSES accepts settings 0 to 8. The 0 setting specifies the maximum (8). The default
setting is 0.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key.
The SET BLUETOOTH menu reappears.
Barcode Handy Terminal
131