Denso BHT-904BB User Manual page 131

[9] PING test
Use the following procedure to run the PING test.
1.
Select "9: PING" at the TEST menu and then press the ENT key.
The TEST PING screen displays as shown on the right.
"1: RUN PING":
"2: SET PING":
"3: SET DEVICE":
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the TEST menu.
"1: RUN PING" (PING Test Screen)
1.
Select "1: RUN PING" at the TEST PING menu and then press the
ENT key.
The current setting values display, and the BHT waits for the transmission
count to be entered.
To change the number of echo requests displayed, enter the desired
value using the numeric keys.
To delete a single character, press the Backspace/clear key. To delete
the entire entry, press and hold the Backspace/clear key or press the SF and Backspace/clear keys
simultaneously.
2.
Press the ENT key.
When the PING test starts running, the message shown displays as
shown on the right.
Press the Backspace/clear key to abort the PING test.
Runs the PING test.
Displays the PING parameter setting screen.
Displays the PING device setting screen.
Barcode Handy Terminal
115