Denso BHT-904BB User Manual page 85

"2: DECODE LEVEL": Decode level
Set the decode level (barcode reading tolerance level).
Press [◄] to decrease the setting value and [►] to increase the setting value.
Decode level entry range: 1 to 9
Decreasing the level increases the barcode reading efficiency, however, the BHT may incorrectly read
low-quality (split or stained) barcodes.
On the other hand, increasing the level decreases the barcode reading efficiency, but will decrease the
possibility of incorrect reading.
"3: ITF": Minimum number of barcode digits to be read for ITF
"4: STF": Minimum number of barcode digits to be read for STF
"5: CODABAR": Minimum number of barcode digits to be read for Codabar
Sets the minimum number of barcode digits to be read.
Press [◄] to decrease the setting value and [►] to increase the setting value.
ITF entry range:
STF entry range:
Codabar entry range:
Setting a small number of digits increases the frequency of missing digits when reading or incorrectly
reading depending on how barcodes are read or the quality of barcodes.
On the other hand, setting a large number will decrease the possibility of such errors.
"6: CODEMARK": Setting for the codemark type
Sets the type of the codemark.
ORIGINAL
Codemark system specified for DENSO
AIM
Codemark system complies with the AIM US "Guidelines on Symbology Identifiers"
Default: 4
2 to 20 Default: 4
1 to 20 Default: 3
3 to 20 Default: 4
Barcode Handy Terminal
69