Denso BHT-904BB User Manual page 110

BHT-904BB
Setting the FTP
1.
Select "2: SET FTP" at the SET TCP/IP menu and then press the
ENT key.
The SET FTP menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight
the item to be set, and then press the ENT key.
Press the Backspace/clear key to return to the SET TCP/IP menu.
"1: SERVER": Setting the FTP server connection environment
Select "1: SERVER" at the SET FTP menu to display the screen on the
right where the current settings are displayed.
"1: SERVER IP":
Sets the IP address for the FTP server.
"2: USER ID":
Sets the user name.
"3: PASSWORD":
Sets the password.
"4: DEFAULT DIR":
Specifies an initial directory through which the FTP server will search for files for transfer first when the
FTP client establishes a connection to the server.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to highlight the item to be set and press
the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the setting to be entered with the
numeric keys and dot key.
Press the SF key to change the entry mode (numeric entry (with no guidance display) and alphabet
entry).
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
(3) Enter the desired value, and then press the ENT key.
Press the Backspace/clear key to return to the SET FTP menu.
94