Denso BHT-904BB User Manual page 84

BHT-904BB
[4] Setting the special barcode reading parameters
Use the following procedure to set the barcode reading conditions.
1.
Select "4: BARCODE" at the SET SYSTEM menu and then press
the ENT key.
The SET BARCODE menu screen displays as shown on the right.
The highlighted display and displayed values will be the current settings.
"1: DECODE SETTINGS":
Goes to the screen on which the barcode reading parameters are set.
"2: OPEN BAR SETTINGS":
Goes to the screen on which the "function in which the reading setting is specified from the system
setting" is set.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight the desired item and then
press the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1: DECODE SETTINGS": Setting for barcode reading conditions and minimum
number of barcode digits to be read
Use the following procedure to set the barcode reading conditions.
1.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5] [6])
to highlight the desired item.
2.
Change the settings with the cursor keys ([◄] [►]) and then press
the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1: INVERT": Black/white inverted barcode reading function
Enables or disables black/white inverted barcode reading.
"ON": Enables black/white inverted barcode reading.
"OFF": Disables black/white inverted barcode reading.
When the black/white inverted barcode reading function is set to ON, it is possible to scan
− Point −
black/white inverted barcodes. However, there is a higher chance of barcodes being
incorrectly scanned.
This should normally be set to "OFF" (black/white inverted barcode reading disabled).
68