Denso BHT-904BB User Manual page 124

BHT-904BB
[6] File test
The file test allows detailed information on program files, and data files to be checked. Additionally,
pressing the M1 key sorts the display sequence of files.
1.
Select "6: FILE" at the TEST menu and then press
the ENT key.
The screen displays as shown on the right, and if any of
the files stored in the memory is defective, an asterisk (*)
or plus sign (+) is prefixed to the name of the defective file
(s).
Refer to "Chapter 2 BHT Preparation" – "2.5.4 If the BHT
Is Shut Down Abnormally" for details about the (*) and (+).
"SIZE: bbbbb":
"FREE: yyyyy":
Files can be sorted each time the M1 key is pressed.
"TYPE": Sorts files by type.
"BROKEN": Displays broken files in descending order.
"BASIC": Displays files in the order of "B: BASIC files",
"C: C data files", and "None: Shared files and
program files".
− Point −
2.
Select the desired file and then press the ENT key.
The selected item is set and the next screen then appears.
Press the Backspace/clear key to return to the previous screen.
In the previous screen, the selected item is highlighted.
108
Used memory size
Available memory size
If a defective file is found, delete it or
overwrite it with a file with the same
name.
Even defective files can be uploaded at
the UPLOAD menu. It is therefore
recommended that important files be
uploaded before being deleted.
ENT key
BS/C key
M1 key
BS/C key Backspace/
clear key
M1 key
BS/C key
M1 key