Denso BHT-904BB User Manual page 105

Barcode handy terminal
Table of Contents

Advertisement

[6] Defining the functions of the Shift key and Magic keys
Use the following procedure to change the key settings.
1.
Select "6: KEY" at the SET SYSTEM menu and then press the ENT
key.
The SET KEY menu screen displays as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5] [6]
[7] [8]) to highlight the item to be set, and then press the ENT key.
"1: SHIFT KEY":
"2: M1 KEY":
"3: M2 KEY":
"4: M3 KEY":
"5: M4 KEY":
"6: M5 KEY":
"7: BS/C KEY":
"8: MENU KEY":
Refer to the following section for details of the above items.
Press the Backspace/clear key to return to the SET COMMUNICATION menu.
"1: SHIFT KEY": Defining the Shift key function
1.
Select "1: SHIFT KEY" at the SET KEY menu and then press the
ENT key.
The SET SHIFT KEY menu screen displays as shown on the right.
The highlighted setting will be the current setting.
"1: Nonlock":
Shifts the keypad only when the SF key is held down.
"2: Onetime":
Shifts only the key pressed immediately after the SF key is pressed.
(The following keys will not be shifted.)
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight the item to be set, and then
press the ENT key.
The selected item will be set and the screen will return to the SET KEY menu.
Displays the SF key definition screen.
Displays the M1 key definition screen.
Displays the M2 key definition screen.
Displays the M3 (left-hand trigger switch) key definition screen.
Displays the M4 (right-hand trigger switch) key definition screen.
Displays the M5 key (SCAN key) definition screen.
Displays the Backspace/clear key definition screen.
Displays the M1 - M5 key menu definition screen.
Barcode Handy Terminal
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents