Denso BHT-904BB User Manual page 90

BHT-904BB
EAN/UPC 3/3
(UPC-E setting)
"1: READING":
Enables or disables reading of the UPC-E.
"2: 1ST CHARACTER":
"3: 2ND CHARACTER":
Sets the first and second characters (country flag) of the UPC-E to "?, 0 to 9".
If "0 to 9" is specified, barcode reading is limited for the UPC-E; the barcode for which the first and
second characters are the same as the specified numbers is read. If "?" is specified, reading is
carried out without any limitation. (UPC-E add-on setting)
"4: READING":
Enables or disables reading of the UPC-E with add-on.
"5: ONLY":
If "ON" is specified, barcode reading is limited; the UPC-E with add-on is only read. If "OFF" is
specified, no limitation is carried out.
"6: DIGIT":
"2&5":
"2":
"5":
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5] [6]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update the setting and return to the SET BARCODE
menu.
74
Enables reading of the 2-, 5-digit add-on.
Enables reading of the 2-digit add-on.
Enables reading of the 5-digit add-on.