Denso BHT-904BB User Manual page 161

Use the following procedure to set the USB communication settings.
[1] USB MENU
1.
Select "1: USB" in the DEVICE menu and then press the ENT key.
The USB menu is displayed as shown on the right.
2.
Use the cursor keys ([◄] [►]) to select the connect mode.
Press the Backspace/clear key to return to the DEVICE MENU.
"1: USB CONNECT MODE":
Setting the USB connection mode.
The highlighted settings are the current settings.
Use the cursor keys ([◄] [►]) to change the settings.
[MTP]:
[COM]:
Continue in the following section for the MTP mode settings.
− Point −
For the COM mode settings, refer to "4.5.6 [5] System Environment Settings".
[2] MTP SETTING menu
1.
Select "MTP" in the USB MENU and then press the ENT key.
The MTP SETTING menu is displayed as shown on the right.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to
select the menu.
Press the Backspace/clear key to return to the USB MENU.
[1:MTP RESTRICTIONS]:
[2:MTP FILE SETTING]:
[3:MTP DISP FILTER]:
Refer to the following sections for each of the above menus.
Connects in the MTP mode.
Connects in the COM mode.
Displays the MTP RESTRICTIONS screen
Displays the MTP FILE SETTING screen
Displays the MTP DISP FILTER screen
Barcode Handy Terminal
USB MENU
1:SET CONNECT MODE
MTP COM
[ENT]DETAIL
MTP SETTING
1:MTP RESTRICTIONS
2:MTP FILE SETTING
3:MTP DISP FILTER
145