Denso BHT-904BB User Manual page 152

BHT-904BB
[3] Detecting remote devices
1.
Select "3: BROWSE DEVICE" at the BLUETOOTH MENU and
then press the ENT key.
The screen on the right appears.
[1: INQUIRY]:
[2: BROWSE SERVICE]:
[3: AUTH BD_ADDR]:
For details of the items above, refer to the following sections.
Press the Backspace/clear key to return to the BLUETOOTH MENU.
Detecting devices
1.
Select "1: INQUIRY" at the BROWSE DEVICE menu and then
press the ENT key.
The screen on the right appears.
[1: DO IT]:
[2: INQUIRY TIME]:
[3: NUM RESPONSES]:
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
2.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: INQUIRY TIME] and then
press the ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired setting.
Set the device inquiry time (in seconds) used temporarily to carry out device inquiry via [1: DO IT]. The
setting range is 0 to 255 (seconds). A period of 10 seconds is set initially.
Note that the setting specified here is not saved.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
136
Switches to the device detection screen.
Switches to the service search screen.
Displays a list of authenticated remote device
addresses.
Starts device detection.
Sets the device inquiry time.
Sets the number of detected devices.