Denso BHT-904BB User Manual page 158

BHT-904BB
[4] File transfer with serial port profile
1.
Select "4: SERIAL PORT" at the BLUETOOTH MENU and then
press the ENT key.
The screen on the right appears.
[1: DO IT]:
[2: MODE]:
[3: TIMEOUT]:
Press the Backspace/clear key to return to the BLUETOOTH MENU.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([2]) to highlight [2: MODE].
3.
Use the cursor keys ([◄] [►]) to highlight the desired setting.
When making a connection via [1: DO IT], set the connection mode to be used temporarily.
Note that the setting specified here is not saved.
4.
Use the cursor keys ([▲] [▼]) or numeric key ([3]) to highlight [3: TIMEOUT] and then press the
ENT key.
Entry mode is activated and the cursor is displayed.
5.
Use the numeric keys to enter the desired setting.
When making a connection via [1: DO IT], set the connection timeout period (in seconds) to be used
temporarily.
The setting range is 1 to 255 (seconds). A period of 255 seconds is set initially.
Note that the setting specified here is not saved.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
6.
Press the ENT key.
142
Connects with the serial port profile for transferring files.
Sets the connection mode.
Sets the connection timeout period.