Denso BHT-904BB User Manual page 146

BHT-904BB
®
[2] Bluetooth parameter setting menu
1.
Select "2: SET BLUETOOTH" at the BLUETOOTH MENU and
then press the ENT key.
The SET BLUETOOTH menu appears.
[1: DEVICE]:
[2: INQUIRY]:
[3: MASTER]:
[4: SLAVE]:
[5: SPP PARAMETER]:
For details of the items above, refer to the following sections.
Press the Backspace/clear key to return to the BLUETOOTH MENU.
Specifying device name
1.
Select "1: DEVICE" at the SET BLUETOOTH menu and then press
the ENT key.
The current setting of the item is displayed.
[1: DEVICE NAME]:
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Press the ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys and dot key to enter the Bluetooth
The Bluetooth
To toggle the entry mode (between numeric and alphabet entries), press the SF key.
For the Bluetooth
communications".
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key.
The SET BLUETOOTH menu reappears.
130
Switches to the screen specifying device
settings.
Switches to the screen specifying device
detection parameters.
Switches to the screen specifying master station parameters.
Switches to the screen specifying slave station parameters.
Switches to the screen specifying protocol options for transferring files with
the serial port profile.
Specifies a name for the Bluetooth
®
device name can be up to 16 characters long. The default setting is DENSO-BHT.
®
device name, refer to "Chapter 5 Communication" – "5.3 Bluetooth
®
device.
®
device name.
®
wireless