Denso BHT-904BB User Manual page 155

Searching for services
1.
Select "2: BROWSE SERVICE" at the BROWSE DEVICE menu
and then press the ENT key.
The screen on the right appears.
[1: DO IT]: Starts service inquiry.
[2: TIMEOUT]: Sets the time for services inquiry.
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
2.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: TIMEOUT] and then press the
ENT key
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired setting.
Set the time for service inquiry (in seconds) temporarily used to carry out service inquiry via [1: DO IT].
The setting range is 1 to 255 (seconds). A period of 30 seconds is set initially.
Note that the setting specified here is not saved.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight [1:
DO IT] and then press the ENT key.
The screen on the right appears. Connect to the specified destination
remote device. The remote device carries out a search among the
corresponding services.
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
Barcode Handy Terminal
139