Denso BHT-904BB User Manual page 163

[5] MTP DISP FILTER menu
1.
Select "3: MTP FILE SETTING" in the MTP SETTING menu and
then press the ENT key.
The MTP DISP FILTER menu (FILE ATTRBUTE) is displayed as shown
on the right.
2.
Use the cursor keys ([▲] [▼])) or numeric keys ([1] [2] [3] [4]) to select the menu.
[1:ATTR DAT]: Select "YES" to display the data files in the file list, select "NO" not to display.
[2:ATTR APL]: Select "YES" to display the application files in the file list, select "NO" not to display.
[3:ATTR FNT]: Select "YES" to display the font files in the file list, select "NO" not to display.
[4:ATTR ANO]: Select "YES" to display the other files in the file list, select "NO" not to display.
Use the cursor keys ([◄] [►]) to highlight and set "YES" or "NO".
Press the Backspace/clear key to return to the MTP SETTING.
3.
Press the ENT key.
The MTP DISP FILTER menu (FILE EXTENSION) is displayed as
shown on the right.
4.
Use the cursor keys ([▲] [▼])) or numeric keys ([1] [2]) to select
the menu.
[1:DISP]: Select "YES" to display the files with the specified extension in the file list, select "NO"
not to display.
[2:SET]: Set the file extension to filter.
Use "," as a delimiter when setting more than one extension.
Set "." for the files without extensions.
Use the cursor keys ([◄] [►]) to highlight and set the parameters.
Press the Backspace/clear key to return to the MTP SETTING.
Control of the specified file can be disabled by not displaying the file in the
− Point −
explorer (i.e. file list) on a PC with the MTP connection.
The file will be displayed in the file list when receiving the filtered file
(drag-and-drop a file into the file list),
The file extension settings precedes the file attribute settings.
Barcode Handy Terminal
MTP DISP FILTER 1/2
FILE ATTRIBUTE
1:ATTR DAT YES NO
2:ATTR APL YES NO
3:ATTR FNT YES NO
4:ATTR ANO YES NO
MTP DISP FILTER 2/2
FILE EXTENSION
1:DISP YES NO
2:SET (DELIMITER:,)
[
[
[
[
]
]
]
]
147