Denso BHT-904BB User Manual page 176

BHT-904BB
[2] Updating the CU-911 system
Update the CU-911 system after downloading the CU-911 system update file.
(Refer to section "4.2.2 CU-911 System Update" for details.)
1.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight
[2: CU-F/W MODIFY] and then press the ENT key.
The CU-F/W MODIFY menu screen displays as shown on the right.
[1: DO IT]:
Updates the CU-911 system.
[2: FILENAME]:
Displays the filename to be used for updating the CU-911 system.
Press the Backspace/clear key to return to the SYSTEM PARAMETER menu.
2.
Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight
[1: DO IT] and then press the ENT key.
The screen shown on the right displays and the CU-911 system is
updated.
The screen displays as shown on the right upon completion of the
update.
Press the Backspace/clear key to return to the CU-F/W MODIFY menu.
When the Displayed File Name Differs from the CU-911 System Update File
If the name of the file displayed at [2: FILENAME] differs from the name of the CU-911 system update file
to be used for updating the system, enter the correct file name.
1.
Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: FILENAME] and then press
the ENT key.
The mode changes to entry mode and the cursor displays.
2.
Use the numeric keys and dot key to enter the correct file name.
Press the SF key to change the entry mode (numeric entry (no guidance display) and alphabet entry).
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
3.
Press the ENT key to set the entered file name.
160