Denso BHT-904BB User Manual page 113

[8] Setting the user program execution option
Use the following procedure to set the user program execution option.
1.
Select "1: EXEC PROG OPTION" at the SET SYSTEM 2/2 menu
and then press the ENT key.
The EXEC PROG OPTION screen appears.
The highlighted settings are the current settings.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to change
the setting and then press the ENT key.
Press the Backspace/clear key to return to the SET SYSTEM menu.
"1: RESUME":
"ON": Enables the resume function.
"OFF": Disables the resume function.
"2: RESTART DIALOG":
Sets the presence of the confirmation screen when the auto-start execution program is re-launched.
For the function where the auto-start execution program is re-launched, refer to "4.3.6 Executing the
Auto-start Execution Program from the Point of Start-up".
"ON": The confirmation screen is displayed.
"OFF": The confirmation screen is not displayed.
The resume function is used to return the BHT to the status (screen) when the BHT power
− Note −
was turned OFF previously.
Barcode Handy Terminal
97