Denso BHT-904BB User Manual page 96

BHT-904BB
"8: STF": Detail setting of the standard 2of5 (STF) reading
1.
Select "2: STF" at the SET BARCODE menu and then press the ENT key.
The SET STF screen appears.
"1: MIN":
Sets the minimum number of the STF digits.
Setting range:
"2: MAX":
Sets the maximum number of the STF digits.
Setting range:
Always set the minimum number of digits to a number less than the maximum number of
− Point −
digits. If the minimum number exceeds the maximum number, a read error occurs.
"3: CD CHECK":
"ON":
"OFF":
"4: TYPE":
"BOTH":
"NORMAL":
"SHORT" :
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select the desired item.
3.
Press the cursor keys ([◄] [►]) to select the desired setting.
4.
Press the ENT or Backspace/clear key to update the setting and return to the SET BARCODE
menu.
80
1 to 99
1 to 99
Reading is carried out only if the check digit is correct. Reading is not carried out if either
the check digit is incorrect or does not exit.
Reading is carried out regardless of the presence of the check digit.
Enables reading of both normal and short types.
Enables reading of the normal type.
Enables reading of the short type.