Denso BHT-904BB User Manual page 109

"2: IP ADDRESS": Setting the IP address
Select "2: IP ADDRESS" at the SET TCP/IP menu to display the screen
on the right where the current settings are displayed.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to highlight
the item to be set and press the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the
setting to be entered with the numeric keys and dot key.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
(3) Enter the desired value and then press the ENT key.
If the IP address, subnet mask and default gateway are all set to [0.0.0.0], DHCP is enabled.
Press the Backspace/clear key to return to the SET TCP/IP menu.
Setting the timeout (only when COM1 selected)
Select "3: TIMEOUT" at the SET TCP/IP menu to display the screen on
the right where the current settings are displayed.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4] [5]) to
highlight the item to be set and press the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the
setting to be entered with the numeric keys and dot key.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold
the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
(3) Enter the desired value, and then press the ENT key.
Press the Backspace/clear key to return to the SET TCP/IP menu.
Barcode Handy Terminal
93