Denso BHT-904BB User Manual page 148

BHT-904BB
Specifying master station parameters
1.
Select "3: MASTER" at the SET BLUETOOTH menu and then
press the ENT key.
The current settings of the items are displayed.
[1: PEER BD_ADDR]: Specifies the remote device address for the
[2: PASSKEY]:
[3: TIMEOUT]:
[4: SECURITY]:
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to highlight the desired setting and
then press the ENT key.
Entry mode is activated and the cursor is displayed.
When setting the "4: SECURITY", use the cursor keys ([◄] [►]) to highlight the desired setting.
3.
Use the numeric and period (.) keys to enter the desired setting.
The PEER BD ADDR parameter consists of a 12-digit hexadecimal number. The ENT key is not available
until the twelfth digit is entered.
The PASSKEY parameter can be up to 16 characters long.
The TIMEOUT parameter accepts settings 1 to 255. The default setting is 30 seconds.
For details of the Bluetooth
®
Bluetooth wireless communications".
To toggle the entry mode (between numeric and alphabet entries), press the SF key.
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key.
The SET BLUETOOTH menu reappears.
132
connection target.
®
Specifies the Bluetooth passkey for the link.
Specifies, in seconds, the timeout limit for the link.
Specifies the security mode for the master station.
®
passkey and security mode, refer to "Chapter 5 Communication" – "5.3